This document is about USB Printer Setup for Windows
Steps for setting up your HP Printer for USB Cable Connections
Check the requirement and before that be prepared with the USB connection setup and driver.
Steps for setting up your HP Printer for USB Cable Connections
Check the requirement and before that be prepared with the USB connection setup and driver.
- Validate the following requirement before you begin
- Turn On the Printer and check is that in ready State
- Get a USB cable less than 3m(9ft 10in) in length.
- There is an accessible USB port on your computer: If you connect through a USB hub or docking station, the printer might not receive enough power to properly operate.
- Connect the USB cable to the computer before installing the HP driver, continue with these steps to remove the printer from the installed devices to help ensure a successful setup. Otherwise, skip to the next step to install the driver.
- Disconnect the printer USB cable from the computer. Do not reconnect the cable until prompted during the driver installation step.
- Search Windows for 'devices', and then click the Devices and Printers control panel set in the results.
- Right-click the icon for your printer model, and then click Remove device. If multiple icons exist for the printer, remove them all.
- Close the Devices and Printers window, and then continue to the next step.
- Download and install the best available printer driver to complete the USB connection.
- Go to http://ww123hp.com/, Choose your HP Envy 4512 Printer model, and then get your onscreen instructions to download and install your driver.
- If the driver or HP Easy Start downloads, follow the on-screen instructions to open the download file to start the setup. When prompted to choose a connection type, select USB. You do not need to complete the remaining steps in this section if the setup is successful.
- If the download fails or your printer is not listed on http://ww123hp.com/, continue with these steps to install a driver from the HP website.
- Go to HP Customer Support - Software and Driver Downloads, enter your printer model, if prompted, and then confirm the operating system version is correct.
- Under Driver-Product Installation Software, click Download next to the full feature driver, and then follow the on-screen instructions to use the guided HP Download and Install Assistant or select Download only to save and run the driver file from your computer. Else if you are looking for the quick solutions call our Toll Free 1 888 249 8496
No comments:
Post a Comment