HP Printer

Saturday, 23 May 2020

For Unboxing 123.hp.com/setup 2050, Look for the manufacturer’s seal on top of the printer’s shipment box.
Cut the tape to open the carton. Remove all the supplies from the box.
Take the HP Deskjet 2050 printer out and ensure it satisfies the requirements such as humidity, temperature.
Remove all the packed materials present on the Deskjet 2050 printer.
Set up the power connectivity by connecting the electrical cable between the printer’s back and the wall socket.
Switch On the Deskjet 2050 printer by long pressing the Power button.
Insert a sufficient quantity of white papers into the main input tray.
Install the original ink cartridges that are provided in the carton.

For Unboxing 123.hp.com/setup 2548, Open the carton and verify the contents that are present inside it.
Unpack the HP Deskjet 2548 printer and ascertain to place it on a dust free area.
Remove the packing materials from the Deskjet 2548 printer.
Set the power connectivity by plugging the electrical cord between the Deskjet 2548 printer and the socket.
Power On the Deskjet 2548 printer and keep enough papers into the main input tray.
Raise the cartridge access door on the Deskjet 2548 printer and check if the carriage moves to the center.
Before proceeding, wait for the carriage to remain silent.
Take the new cartridge and discard the orange tape from it.
Handle the cartridge by the sides and then keep it into the correct slot.
Move the cartridge forward until it clicks into place.
Insert the other cartridge by performing the above instructions.
Lower the cartridge access door and wait until the 123.hp.com/dj2548 printer prints an alignment page.

For Unboxing 123.hp.com/setup 3720, After the printer is shipped, check if the seal is present on the top.
Tear the sealed tape and open the carton.
Take all the equipment such as power cord, CD, USB cable, manual out.
Remove the printer and insert it on a leveled surface.
Make sure the Deskjet 3720 printer has no damages on it.
Discard the protective tapes that are present on the inside and outside regions of the printer.
Insert one end of the electrical cord into the printer port and the other end to a working electrical socket.
Turn On the Deskjet 3720 printer by force pressing the Power button.
Keep enough quantity of papers into the main input tray and then insert the ink cartridges.
Print an alignment page to complete the 123.hp.com/dj3720 installation process.

Break the seal to the shipment box.
The installer CD, user guide, and other components are given in the box.
Remove the Deskjet 3634 printer from the box and keep it on a dust free, well-ventilated surface.
Ensure there are no damages to the printer. Discard the packing tapes from the device.
Navigate to your Deskjet 3634 printer’s rear and plug one end of the power cord to it. Connect your cord’s other end to a wall outlet.
Long press the Power button to switch On the Deskjet 3634 printer.
Browse through the menu and select the desired language and tap OK.
Load a sufficient quantity of unused papers into the paper tray.
Install the genuine ink cartridges into the slots.
Wait until an alignment page gets printed by the 123.hp.com/dj3634 printer to finish the process.

Unpack the Deskjet 2541 printer’s shipment box.
Remove the CD, manual, and other accessories from the carton.
Take the printer out of the box and insert it on an even surface.
Ensure the device meets all the conditions such as humidity and temperature.
Attach the electrical cable between the Deskjet 2541 printer’s back and the socket. Power On the printer.
Keep sufficient blank papers into the main input tray.
Install the cartridges that are supplied with the HP Printer.
Raise the cartridge access door, and the carriage moves to the replacement area.
Take the new cartridge out and discard the protective tape.
Handle the cartridge by its sides and with the nozzles on it facing the 123.hp.com/dj2541 printer.
Place the cartridge into its correct slot and push until it gets seated firmly.
Lower the access door and wait until the Deskjet 2541 printer prints an alignment page.

Unboxing 123.hp.com/setup 3520, Once the printer is supplied to your home, ensure the correct seal is present on top of the package.
Tear the tape, open the box and take all the accessories such as warranty card, manual out of it.
Remove the Deskjet 3520 printer and insert it on a flat surface.
Discard all the tapes from the printer.
Insert the electrical cable between the printer’s rear and the outlet.
Power On the HP Deskjet 3520 printer.
Set your choices on the printer’s front panel.
Place the original ink cartridges into their slots.
Print an alignment report.
Keep enough A4 papers into the input tray.
Launch the software from our website.
Set the network connection between the 123.hp.com/dj3520 printer and the computer.

After the Deskjet 3510 printer is shipped, check if the seal is present on it.

Break the sealed package and open the shipment box.

Remove the equipment such as power cord, CD from the box.

Take the printer out and keep it on a leveled surface.

Ensure the printer has no damages on it.

Discard the protective materials that are present on the Deskjet 3510 printer.

Remove the sticker on the printer’s front panel.

Attach one end of the power cable into the printer’s port and the other end to an outlet.

Set your choices on the touch display.

Place papers in the paper tray and install the original ink cartridges.

Complete the 123.hp.com/setup 3510 process by printing an alignment page.