How to Install HP Officejet Pro 8730

1. For HP Officejet Pro 8730 Setup – Unboxing, Lift the printer from the packing box, remove tape and packing materials from the box which came along with your printer.
2. Clasp the handles on either side of the printer and open the ink cartridge access door till it sets into place to discard all tape and packing material from inside the printer.
3. Latch the cartridge access door of your printer.
4. You should link the power cord to the posterior side of your printer, then link the other end of the power cord into the socket and turn on the HP Officejet Pro 8730 printer.
5. Open the input tray door of the printer and then position a stack of paper with the width guides appropriately aligned.
6. Open the ink cartridge access door, tap only the black plastic on the ink cartridge until it sets into the correct place and then, close the ink cartridge access door.
7. Once you have completed with the installation of the ink cartridges, the printer automatically prints an alignment page.
8. To acquire the best quality, placing the ink cartridge is obligatory.
9. Raise the scanner lid of the 123.hp.com/ojpro8730 printer.
10. HP Officejet Pro 8730 Setup and Installation
11. The paper tray must be fed into the feeder tray. Be careful when you feed the paper into the tray.
12. The improper placing of paper into the tray leads to paper jam issue.
13. It is compulsory to HP officejet pro 8730 setup the ink cartridge into the slot so that the print job can be started.
14. It is not possible to operate your printer without installing the printer software. Install the software for the printer to get it in a working condition.
15. Make use of the guides and install the printer software for the printer.