How to Install HP Officejet Pro 8100

1. Remove the printer from the box and free off the printer from the packing materials.
2. Hold the either side of the handles so that you can access the ink cartridge access door till it fits into the place. By doing so, remove all the tapes and packing materials from inside the HP Officejet Pro 8100 printer.
3. The cartridge access door should be shut down.
4. Establish the connection between the computer and the printer using the power cord. Subsequently, switch on the printer.
5. Get access to the input tray to place the stack of unused paper with the proper width guides.
6. Open the ink cartridge access door. You are supposed to touch only the black plastic on the ink cartridge until it placed properly. Subsequently, shut down the ink cartridge access door.
7. Once the 123.hp.com/ojpro8100 installation of ink cartridge has been over, the printer prints alignment page on its own.
8. The best quality can be availed by aligning the ink cartridge.
9. Unlock the scanner lid.
10. 123.hp.com/ojpro8100 Setup and Installation
11. The alignment page is located in such a way that the printed side faces down on the scanner glass. Mount it based on the inscribed guides around the glass.
12. Lock the scanner lid, subsequently go to the control panel of the printer and tap Ok.
13. The ink cartridges should be placed based on the printer model which you own.
14. Trail the instruction to download and install the printer software.
15. The HP Officejet Pro 8100 printer should not establish connection to the computer until you are guided to do so.