How to Setup HP Officejet Pro 8746

1. Take off the printer, tape and packing materials from the box which came along with your printer.
2. Clasp the handles on either side of the printer and open the ink cartridge access door till it fixes into place to discard all tape and packing material from inside the printer.
3. Lock the cartridge access door.
4. Link the power cord to the posterior side of your printer, then 123.hp.com/setup 8746 the other end of the power cord into the socket and turn on the printer.
5. Open the input tray door and then position a stack of paper with the width guides properly aligned.
6. Open the ink cartridge access door, touch only the black plastic on the ink cartridge until it fixes into the correct place and then, close the ink cartridge access door.
7. Once you are done with the installation of the ink cartridges, the printer automatically prints an alignment page.
8. To acquire the best quality, positioning the 123.hp.com/ojpro8746 ink cartridge is mandatory.
9. Raise the scanner lid.
10. Mount the alignment page with the print side downward on the scanner glass. Place it conferring to the engraved guides around the glass.
11. Close the scanner lid, and then click on the OK option on the printer’s control panel.
12. Place the ink cartridge into your corresponding printer.
13. Install the printer software.
14. The printer hardware and the printing software are now installed.
15. Do not try to link the printer to a computer until it is instructed to do so in the printing software.