Install the 123 HP Envy 4522 printer with the help of our guides. Make use of the components which came along with your printer. Use the installation CD to install the printer driver and software. If it does not work, uninstall the existing driver and install it again. Or else, download the compatible driver from our website. Insert the ink cartridges into its respective slot. Position the duplexer into the printer. Ensure that the duplexer is placed properly. Use the USB cable to connect the printer and the computer.
Step 2:Remove all the tapes inside the ink cartridge access door, once you are done, close the ink cartridge access door.
Step 3:Connect the power cord to the hind side of your 123.hp.com/envy4522 printer, link the other end of the power cord to the socket.
Step 4:Power up the printer. Open the input tray, insert the stack of paper and align the width guides correctly.Open the ink cartridge access door. Position the ink cartridges which is corresponding to their slot and close the cartridge door.
Step 5:Once you completed the installation process, an alignment page gets printed by your 123 HP Envy 4522 printer on its own.Now the ink cartridge gets aligned properly so automatically you can attain the best print quality. The printer’s print quality gets improved.
Step 6:Close the scanner lid and then select OK on the printer’s control panel. Configure an appropriate driver and software for your printer.
Step 7:Open the Scanner lid and position the alignment page on the scanner glass. It must be positioned according to the conferred guides around the scanner glass.
Step 8:Do not enable the connection between your HP Envy 4522 printer and the computer until it is prompted.
Step 9:If your printer performs both the print and scan functions successfully after the printer driver installation, then it is all set. It is always recommended to restart your computer and printer to make the changes effective.
HP ENVY 4522 PRINTER SETUP SIMPLE STEPS
Step 1:Take out the HP Envy 4522 printer from the box and then unwrap the packing material. Open the cartridge access door.Step 2:Remove all the tapes inside the ink cartridge access door, once you are done, close the ink cartridge access door.
Step 3:Connect the power cord to the hind side of your 123.hp.com/envy4522 printer, link the other end of the power cord to the socket.
Step 4:Power up the printer. Open the input tray, insert the stack of paper and align the width guides correctly.Open the ink cartridge access door. Position the ink cartridges which is corresponding to their slot and close the cartridge door.
Step 5:Once you completed the installation process, an alignment page gets printed by your 123 HP Envy 4522 printer on its own.Now the ink cartridge gets aligned properly so automatically you can attain the best print quality. The printer’s print quality gets improved.
Step 6:Close the scanner lid and then select OK on the printer’s control panel. Configure an appropriate driver and software for your printer.
Step 7:Open the Scanner lid and position the alignment page on the scanner glass. It must be positioned according to the conferred guides around the scanner glass.
Step 8:Do not enable the connection between your HP Envy 4522 printer and the computer until it is prompted.
Step 9:If your printer performs both the print and scan functions successfully after the printer driver installation, then it is all set. It is always recommended to restart your computer and printer to make the changes effective.
No comments:
Post a Comment