How to Setup HP Officejet Pro 8719

Are you configuring your printer hardware for the first time? Take a glance through the user manual to follow the steps below for Unbox the printer.

1. While unpacking the printer, check the list of contents consigned in the box as it may vary based on the country/region.
2. Discard all the packing materials from the posterior of the printer and try to eliminate the film gradually from the printer’s control panel.
3. If there are any packing material interior of the printer, raise the scanner lid and then discard the packing material.
4. After closing the scanner lid, you are done with this step.
5. Ensure that you have the power cable that is connected to the 123.hp.com/ojpro8719 printer.
6. Plug in the power cable to the printer’s rear and into the wall outlet and then switch on the printer.
7. Set your preferred language, country/region and current date and time on the printer’s control panel.
8. After setting your preferences, press Yes to ratify your choice.
9. Eliminate the input tray from its position and then discard the packing materials, if any.
10. Place the plain paper into the input tray with short edge forward and print side down.
11. You should glide the paper width guides inwards until they rest against the edges of the paper.
12. After completing the above steps, push the input tray into the printer.
13. Use the ink cartridges that came along with the printer box.
14. Initially access the ink cartridge access door.
15. Halt for a minute until the carriage is silent. Now, take out the ink cartridge from the package.
16. Install the 123.hp.com/ojpro8719 ink cartridges to their respective slot and ensure that it clicks into place.
17. Redo the above procedure for other ink cartridges also
18. After completing the above steps, shut the ink cartridge access door.
19. Download and install the printer software from our website. Try to print the alignment page from the computer until prompted by the printing software.