How to Install HP Deskjet 2050 Printer

1. For Unboxing 123.hp.com/setup 2050, Look for the manufacturer’s seal on top of the printer’s shipment box.
2. Cut the tape to open the carton. Remove all the supplies from the box.
3. Take the HP Deskjet 2050 printer out and ensure it satisfies the requirements such as humidity, temperature.
4. Remove all the packed materials present on the Deskjet 2050 printer.
5. Set up the power connectivity by connecting the electrical cable between the printer’s back and the wall socket.
6. Switch On the Deskjet 2050 printer by long pressing the Power button.
7. Insert a sufficient quantity of white papers into the main input tray.
8. Install the original ink cartridges that are provided in the carton.

How to Install HP Deskjet 2548 Printer

1. For Unboxing 123.hp.com/setup 2548, Open the carton and verify the contents that are present inside it.
2. Unpack the HP Deskjet 2548 printer and ascertain to place it on a dust free area.
3. Remove the packing materials from the Deskjet 2548 printer.
4. Set the power connectivity by plugging the electrical cord between the Deskjet 2548 printer and the socket.
5. Power On the Deskjet 2548 printer and keep enough papers into the main input tray.
6. Raise the cartridge access door on the Deskjet 2548 printer and check if the carriage moves to the center.
7. Before proceeding, wait for the carriage to remain silent.
8. Take the new cartridge and discard the orange tape from it.
9. Handle the cartridge by the sides and then keep it into the correct slot.
10. Move the cartridge forward until it clicks into place.
11. Insert the other cartridge by performing the above instructions.
12. Lower the cartridge access door and wait until the 123.hp.com/dj2548 printer prints an alignment page.

How to Install HP Deskjet 3720 Printer

1. For Unboxing 123.hp.com/setup 3720, After the printer is shipped, check if the seal is present on the top.
2. Tear the sealed tape and open the carton.
3. Take all the equipment such as power cord, CD, USB cable, manual out.
4. Remove the printer and insert it on a leveled surface.
5. Make sure the Deskjet 3720 printer has no damages on it.
6. Discard the protective tapes that are present on the inside and outside regions of the printer.
7. Insert one end of the electrical cord into the printer port and the other end to a working electrical socket.
8. Turn On the Deskjet 3720 printer by force pressing the Power button.
9. Keep enough quantity of papers into the main input tray and then insert the ink cartridges.
10. Print an alignment page to complete the 123.hp.com/dj3720 installation process.

How to Install HP Deskjet 3634 Printer

1. Break the seal to the shipment box.
2. The installer CD, user guide, and other components are given in the box.
3. Remove the Deskjet 3634 printer from the box and keep it on a dust free, well-ventilated surface.
4. Ensure there are no damages to the printer. Discard the packing tapes from the device.
5. Navigate to your Deskjet 3634 printer’s rear and plug one end of the power cord to it. Connect your cord’s other end to a wall outlet.
6. Long press the Power button to switch On the Deskjet 3634 printer.
7. Browse through the menu and select the desired language and tap OK.
8. Load a sufficient quantity of unused papers into the paper tray.
9. Install the genuine ink cartridges into the slots.
10. Wait until an alignment page gets printed by the 123.hp.com/dj3634 printer to finish the process.

How to Install HP Deskjet 2541 Printer

1. Unpack the Deskjet 2541 printer’s shipment box.
2. Remove the CD, manual, and other accessories from the carton.
3. Take the printer out of the box and insert it on an even surface.
4. Ensure the device meets all the conditions such as humidity and temperature.
5. Attach the electrical cable between the Deskjet 2541 printer’s back and the socket. Power On the printer.
6. Keep sufficient blank papers into the main input tray.
7. Install the cartridges that are supplied with the HP Printer.
8. Raise the cartridge access door, and the carriage moves to the replacement area.
9. Take the new cartridge out and discard the protective tape.
10. Handle the cartridge by its sides and with the nozzles on it facing the 123.hp.com/dj2541 printer.
11. Place the cartridge into its correct slot and push until it gets seated firmly.
12. Lower the access door and wait until the Deskjet 2541 printer prints an alignment page.

How to Install HP Deskjet 3520

1. Unboxing 123.hp.com/setup 3520, Once the printer is supplied to your home, ensure the correct seal is present on top of the package.
2. Tear the tape, open the box and take all the accessories such as warranty card, manual out of it.
3. Remove the Deskjet 3520 printer and insert it on a flat surface.
4. Discard all the tapes from the printer.
5. Insert the electrical cable between the printer’s rear and the outlet.
6. Power On the HP Deskjet 3520 printer.
7. Set your choices on the printer’s front panel.
8. Place the original ink cartridges into their slots.
9. Print an alignment report.
10. Keep enough A4 papers into the input tray.
11. Launch the software from our website.
12. Set the network connection between the 123.hp.com/dj3520 printer and the computer.

How to Install HP Deskjet 3510

After the Deskjet 3510 printer is shipped, check if the seal is present on it.
Break the sealed package and open the shipment box.
Remove the equipment such as power cord, CD from the box.
Take the printer out and keep it on a leveled surface.
Ensure the printer has no damages on it.
Discard the protective materials that are present on the Deskjet 3510 printer.
Remove the sticker on the printer’s front panel.
Attach one end of the power cable into the printer’s port and the other end to an outlet.
Turn On the Deskjet 3510 printer.
Set your choices on the touch display.
Place papers in the paper tray and install the original ink cartridges.
Complete the 123.hp.com/setup 3510 process by printing an alignment page.

How to Install HP Deskjet 4530

Once you receive your printer from freight, the first step is to do unbox 123.hp.com/setup 4530.
Remove any pieces of tape that are holding things in place.
The duplexer should be placed in the slot found on the posterior side of the printer.
Connect the power cord of your printer to the wall outlet and power up your printer.
Select your preferred language on the control panel of your 123.hp.com/dj4530 printer and then click continue.
Download and install the latest driver and software.
Unlock the ink cartridge access door and install the cartridges.
Load the paper tray with the sheets of plain paper.

How to Install HP Deskjet 4535

This section is all about the necessary things to be done once you get your HP printer.

Take the printer out from the shipment box and remove all plastic tapes wound all around the printer.

Check if your printer has an optional input tray. If yes, trail the prompts to install it on your printer.

With the power cord connected to the one end to the printer’s rear end and another end linked to the power source, turn on the printer, and set the preference.

Downloading of software should be done after 123.hp.com/setup 4535 the ink cartridges, and loading of paper into the tray.

How to Install HP Officejet 3830 Printer

1. Offload the HP Officejet 3830 printer from its carton.
2. Discard the sealing tape and protective packaging of the printer.
3. Use the supplied power cord to connect the printer and the electric power supply.
4. Push the Power button.
5. Pick your language & country.
6. Set the Time & Date.
7. Wait for the printer carriage to halt after opening the ink cartridge access door.
8. Take care while removing the ink cartridge from its package.
9. Tuck the tri-color ink cartridge into the left slot and the black ink cartridge into the right one.
10. Close the ink cartridge access door once the ink cartridge installation is over.
11. Place printing paper in the input tray and click OK.
12. Proceed with the alignment process by placing the printed alignment sheet downwards on the scanner glass.
13. Continue by installing the printer driver on your computer.
14. Connect your computer and printer when instructed by the installer.
15. Go ahead and begin printing on your HP Officejet 3830 printer.

How to Intsall HP Deskjet 1510

1. For Unboxing 123.hp.com/setup 1510, Look for an authorized seal on top of the Deskjet 1510 printer’s carton.
2. Unpack the box by cutting the packaging tape.
3. Remove all the contents from the shipment box.
4. Take your Deskjet 1510 printer out.
5. Ascertain to keep the device on an even surface.
6. Set the power connection by inserting one end of the power cord at the printer’s rear.
7. Now attach the cord’s other side to your outlet.
8. Switch On the HP Deskjet 1510 printer.
9. Insert enough sheets of white paper into the input tray.
10. Install the cartridges that are delivered along with the printer.

How to Install HP Deskjet 5810

Take out the 123.hp.com/dj5810 printer from the box and remove all the plastic tape from the printer. Place it on a flat surface.

Connect the power cord to the printer and turn it on. Make sure that the ink valve is in the vertical position.

Open the tank lid and pour the ink into their respective tanks. Close the ink tank lid.

Take out the printheads from their package and pull the orange plugs to remove them from the printheads.

Remove the tape from the printhead contacts. Slide them into position and lock them into place.

Load paper into the paper tray and align the printheads. Download and install the HP Deskjet 5810 printer software to start using the printer.

How to Install HP Deskjet 5570

Check the back of the box to know what’s inside. Take out the printer from the box and remove the plastic tape from the outer body of the printer.

Lift the scanner lid and remove the packing materials from it. Remove the plastic tape from the ink cartridge area and the paper trays. Recycle the packing materials.

Connect the power cord to the printer and turn it on. Finish the initial setup and press OK.

Take out the ink cartridges from the package, remove the plastic tape and slide it in into its slot in the ink cartridge area.

Push it in, to lock it into place. Load the paper into the paper tray and 123.hp.com/setup 5570 the printer software.

How to Install HP Deskjet 4729

Use this simple instructions to setup your printer which is delivered at your door step.
Remove all the plastic tapes and covers which are wound in and around your printer.
Affirm that you have plugged the printer to a USB port directly on your computer, and not via a USB hub.
Certain printer has to be linked to a power source as well. Scrutinize that the HP Deskjet 4729 printer is powered on.
In general, the latest operating system version of Mac and Windows are generally designed to install the necessary drivers automatically.
After assembling all hardware look for the 123.hp.com/dj4729 printer driver to be installed on your Mac or Windows computer on 123.hp.com/dj4729 Setup and Installation.
You can make use of the driver that comes as a CD package or you can avail it from us.
Once the download gets over, use the prompts to run the file and install it on your device.

How to Install HP Deskjet 4720

Make use of this simple guideline to setup your 123.hp.com/dj4720 printer which is delivered at your door step.

Make sure that you have removed all the plastic tapes and covers which are wrapped in and around your printer.

Ascertain that you have connected the printer to a USB port directly on your computer, and not using a USB hub.

A few printers have to be linked to a power source as well. Check if the printer is powered on.

Generally, the newest operating system version of Mac and Windows are designed to install the necessary drivers by itself.

After you fixed all hardware search for the HP Deskjet 4720 printer driver to be installed on your Windows or Mac computer.

You can also utilize the driver that comes as a CD package or you can get it from us.

After the download is accomplished, trail the prompts to run the file and install it on your computer.

How to Install HP Deskjet 4670 Printer

Take out the printer from the box and remove all the packing materials from it before you place it on a flat surface.

Connect one end of the power cord to the rear of the printer and the other end to the power socket. Turn on the printer and enter the language, location, date and time etc. to finish the initial setup.

Pull out the paper tray and slide the paper width guide to a corner. Load a stack of paper into the tray and adjust the paper width guide accordingly.

Open the ink cartridge access door and slide in the cartridge into its slot and push it in, to lock it into place. Align the cartridges and install the driver software.

How to Install HP Deskjet 2630

1. Go through the instructions provided in this section and setup your printer without depending on anyone.
2. You have to check the contents that are shipped along with the printer. The components varys for different location and region.
3. Free all the components from its packing materials and use the prompts to assemble all hardware.
4. Make use of the instructions to establish the printer 123.hp.com/setup 2630 and install the ink cartridge into its slot.
5. Make sure that you have placed the plain white unused paper in the loading tray of the printer.
6. Download the above application from the manufacturer’s website and use it’s features to solve the printer problems.
7. You can choose either the USB, Wired, or Wireless connection based on your printer’s compatibility.
8. Proceed to search and install the latest HP Deskjet 2630 software and driver for your printer once hardware assembling gets over.

How to Install HP Deskjet 2542

1. Attach the power cord to the purple port on the back of the printer.
2. Power it up with the nearby wall socket.
3. Fire up the printer by pressing the Power button.
4. Unwrap the ink cartridges and peel off the orange tapes from them.
5. Load them in the corresponding ink cartridge slots.
6. Lift the carriage access lid and insert paper sheets into it.
7. Connect the printer to your home network with the Wireless Setup Wizard.
8. Install the printer driver on your computer with the supplied CD.
9. Opt for wireless setup and follow the on-screen directions.
10. Click open the printer driver once it is installed.
11. Configure the 123.hp.com/dj2542 printer settings as per your preferences.
12. Begin to perform the printer functions with the printer application.

How to Install HP Deskjet 2540

1. Offload the printer from its package and set aside the printer accessories.
2. Pull the printer out of the box using the handles on the carton.
3. Take off the blue strips holding the printer accessories in their places.
4. Secure the power cord into the adapter and then into the power supply.
5. Locate the Power button on the top of the printer and press it.
6. Once the printer stops making noises, prepare to install the ink cartridges.
7. Lower the ink cartridge access door and see the carriage move to the center.
8. Pull down the orange tabs on the cartridges and slide them into their respective slots.
9. Adjust the print width guides and load paper in the input tray.
10. Find the driver for your printer model on our site and install it on your computer.
11. Connect the 123.hp.com/dj2540 printer to a network during the driver installation process.
12. Direct commands to the printer from the computer and begin to print.

How to Install HP Deskjet 2135

Unbox your printer. Peel off all the packing tapes stuck on your printer.

Connect one end of the power cord to your printer and the other end to an electrical outlet. Switch it on.

Open ink cartridge access door. Remove the ink cartridge, strip off the tape and push it back in.

Lift the input tray and spread the paper width guides. Load a stack of paper and close it back.

Place a paper on scanner lid and press Start Copy Black (or) Color on your printer control panel to align ink cartridge.
Download and install 123.hp.com/dj2135 software drivers on your computer.

How to Install HP Deskjet 3700

Setting up the printer is not very complicated as you have the simplest guidelines on our website.

Make use of the guidelines to unpack the printer, feed plain paper into the tray, 123.hp.com/setup 3700 the ink cartridge, assemble hardware, and install the required software.

Generally, the printer and the accessories deliver at your doorsteps are covered with plastic tapes and bubble wrappers to avoid mechanical damage.

Search and remove them from each region of your deskjet 3700 printer and discard or recycle them.

Give power supply to the HP Deskjet 3700 printer using a power cord which is delivered along with the printer.

Set preferences and click on ok to confirm the changes. Subsequently, feed plain paper into the tray.
Once the paper tray is loaded with enough amount of paper, install the ink cartridges.

After installing all the ink cartridge let your printer print an alignment page to get best quality from your 123.hp.com/dj3700 printer.

After assembling all accessories, check for an appropriate software and download it on the computer.

How to Install HP Deskjet 3630

You need to unbox the printer and then discard the plastic wrap from it. If necessary, recycle the wrapping materials.

Now, connect the printer to an electrical outlet and then switch on your printer. Plug in the power cord to the back of the printer and the electrical socket.

Ensure that you 123.hp.com/setup 3630 the HP ink cartridges in their respective slots. Note that you can touch only the black plastic on the ink cartridge.

You can discard the plastic wrap from the ink cartridge and then mount plain paper into the input tray.

Now, install the printer software and then to complete the ink cartridge alignment, follow the prompts on the alignment page.

How to Install HP Deskjet 3774

Unpack your HP Deskjet 3774 printer box. Remove all the contents from the box and peel off the packing tapes on it.

Connect the power cord to the rear of the printer and the other end to an electrical outlet. Turn on the printer.

Raise open the access door. Strip off all the tapes on the ink cartridge and install it.

Extend the input tray and slide the paper width guides away. Load a stack of plain paper and close it back.

Place a plain paper on the scanner glass and tap the Start Copy Black (or) Color button to start aligning.

Download and install the 123.hp.com/dj3774 software drivers on your computer.

How to Setup HP Deskjet 3779

Remove the printer from the box and then discard the plastic wrap from it. You can also recycle the packing materials.

Connect the printer to a wall outlet and then turn on the printer. Plug in the power cord to the rear of the printer and the electrical outlet.

Install the HP Deskjet 3779 ink cartridges that had been shipped with the printer. Ensure that you touch only the black plastic on the ink cartridge.

Now, discard the plastic tape from the ink cartridge and then load plain paper into the input tray.

Install the printer software and then follow the instructions on the alignment page to complete the 123.hp.com/dj3779 ink cartridge alignment.

How to Setup HP Officejet Pro 8747

1. Take off the printer from the shipment box, which came along with your printer and then remove the tape and packing materials.
2. Ensure that you clutch the handles on either side of your printer and unlock the ink cartridge access door till it fixes into place to take off all tape and packing material from inside the printer.
3. Close the cartridge access door.
4. Plug the power cord into the posterior side of your printer, and then 123.hp.com/setup 8747 the other end of the power cord into the socket and turn on the printer.
5. Open the input tray door and then place a stack of paper with proper width guides.
6. Open the ink cartridge access door and touch only the black plastic on the ink cartridge until it fixes into the proper place and then, close the ink cartridge access door.
7. Once you have completed the ink cartridge installation, the printer automatically prints an alignment page.
8. To obtain the best quality, aligning of the ink cartridge is mandatory.
9. Open the scanner lid.
10. Position the alignment page with the print side downward on the scanner glass. Place it according to the engraved guides around the glass.
11. Close the scanner lid, and then click OK on the control panel of your 123.hp.com/ojpro8747 printer.
12. Mount the ink cartridge into your corresponding printer.
13. Install the printer software.
14. Your printer hardware and printing software are now installed.
15. Do not try to link the printer to a system until it is instructed to do so in the printing software.

How to Setup HP Officejet Pro 8746

1. Take off the printer, tape and packing materials from the box which came along with your printer.
2. Clasp the handles on either side of the printer and open the ink cartridge access door till it fixes into place to discard all tape and packing material from inside the printer.
3. Lock the cartridge access door.
4. Link the power cord to the posterior side of your printer, then 123.hp.com/setup 8746 the other end of the power cord into the socket and turn on the printer.
5. Open the input tray door and then position a stack of paper with the width guides properly aligned.
6. Open the ink cartridge access door, touch only the black plastic on the ink cartridge until it fixes into the correct place and then, close the ink cartridge access door.
7. Once you are done with the installation of the ink cartridges, the printer automatically prints an alignment page.
8. To acquire the best quality, positioning the 123.hp.com/ojpro8746 ink cartridge is mandatory.
9. Raise the scanner lid.
10. Mount the alignment page with the print side downward on the scanner glass. Place it conferring to the engraved guides around the glass.
11. Close the scanner lid, and then click on the OK option on the printer’s control panel.
12. Place the ink cartridge into your corresponding printer.
13. Install the printer software.
14. The printer hardware and the printing software are now installed.
15. Do not try to link the printer to a computer until it is instructed to do so in the printing software.

How to Install HP Officejet Pro 8740

1. Unpack the printer and its accessories.
2. Rotate the printer on its side to easily take out the printer.
3. Discard the foam cover and plastic tapes inside and outside the printer.
4. Use the power cord shipped with your printer to power it up.
5. Input your preferences in the Language & Country sections on the control panel.
6. Click Continue setup after setting the Time & Date.
7. Choose the Self-Managed setup and continue with the exhibited instructions.
8. Lift the ink cartridge door and insert each of the cartridges in their respective slots.
9. Tug the input tray all the way out of the printer.
10. Feed fresh sheets of paper and adjust the width and length guides.
11. The 123.hp.com/ojp8740 printer performs print head alignment and printing automatically.

How to Install HP Officejet Pro 8730

1. For HP Officejet Pro 8730 Setup – Unboxing, Lift the printer from the packing box, remove tape and packing materials from the box which came along with your printer.
2. Clasp the handles on either side of the printer and open the ink cartridge access door till it sets into place to discard all tape and packing material from inside the printer.
3. Latch the cartridge access door of your printer.
4. You should link the power cord to the posterior side of your printer, then link the other end of the power cord into the socket and turn on the HP Officejet Pro 8730 printer.
5. Open the input tray door of the printer and then position a stack of paper with the width guides appropriately aligned.
6. Open the ink cartridge access door, tap only the black plastic on the ink cartridge until it sets into the correct place and then, close the ink cartridge access door.
7. Once you have completed with the installation of the ink cartridges, the printer automatically prints an alignment page.
8. To acquire the best quality, placing the ink cartridge is obligatory.
9. Raise the scanner lid of the 123.hp.com/ojpro8730 printer.
10. HP Officejet Pro 8730 Setup and Installation
11. The paper tray must be fed into the feeder tray. Be careful when you feed the paper into the tray.
12. The improper placing of paper into the tray leads to paper jam issue.
13. It is compulsory to HP officejet pro 8730 setup the ink cartridge into the slot so that the print job can be started.
14. It is not possible to operate your printer without installing the printer software. Install the software for the printer to get it in a working condition.
15. Make use of the guides and install the printer software for the printer.

How to Setup HP Officejet Pro 8726

Step 1 : Free Off the Printer from the Box
Take away the officejet pro 8726 printer from the box and all tape, stickers, and packing materials from the printer.
Eliminate the printer from the packing box.
Eliminate all the tapes and packing materials from the printer’s outside portion, and then remove the film from the printer control panel.
High the scanner lid, take out the packing material from the scanner glass and then latch the scanner lid.

Step 2 : Attach the Power Cord and Set your Choices
Attach the printer into an electrical socket, switch on the printer, and then design the choices.
Join the power cord to the rear of the printer, then attach the other end of the power cord into the electrical outlet.
Power on the 123.hp.com/ojpro8726 printer.
To fix the choices on the printer control panel, choose the preferred language and country/ region, and then go with the Yes option to confirm the choices made.
If showed, set the date and time, and then tap on the Yes option.

Step 3 : Locate Paper Into the Input Tray
The input tray should be towed out and the packing materials should be eliminated.
The plain white paper should be installed into the input tray with the short edge onward and the print side facing down.
The stack should be shoved into the tray until it locks into the place properly.
The paper width guides should be slithered till they rest against the edges of the paper.
The paper tray should be dragged out into the printer.

Step 4 : Mount the OJ Pro 8726 Ink Cartridges
The ink cartridge door should be unlocked.
The tape that is covered around the ink cartridges should be removed.
The ink cartridges should be held by its edges with the color circle near you, and then the ink cartridge should be progressed till it snaps into the place.
The ink cartridge access door should be locked.
The 123.hp.com/ojpro8726 printer lines up the printhead, and then the alignment page gets printed.

Step 5 : Downloading the HP Officejet 8726 Software from our Website
The HP Officejet Pro 8726 printer hardware is now installed, and continue to download the print software. Avoid connecting the printer to the computer until prompted to do so in the printer software.

How to Setup HP Officejet Pro 8724

1. The printer should be taken out from the box and the packing materials are to be unsealed from it.
2. The handles are to be grasped on any one side of the printer, the ink cartridge door is to be accessed and all the packing materials are to be discarded from inside your printer.
3. The cartridge access door is to be lowered.
4. The power cord is to be connected to the hind side of your printer, the other end of the power cord is to be linked to the socket and the printer is to be powered up.
5. The alignment page should be placed with the print side downward on the scanner glass. It should be positioned according to the conferred guides around the glass.
6. After lowering the scanner lid, click OK on the control panel of the printer.
7. Place the ink cartridge in line with the printer.
8. The 123.hp.com/ojpro8724 printer software should be installed.
9. Make certain that there is no need to enable a connection between the printer and the system until you are prompted to do so in the printing software.

How to Setup HP Officejet Pro 8719

Are you configuring your printer hardware for the first time? Take a glance through the user manual to follow the steps below for Unbox the printer.

1. While unpacking the printer, check the list of contents consigned in the box as it may vary based on the country/region.
2. Discard all the packing materials from the posterior of the printer and try to eliminate the film gradually from the printer’s control panel.
3. If there are any packing material interior of the printer, raise the scanner lid and then discard the packing material.
4. After closing the scanner lid, you are done with this step.
5. Ensure that you have the power cable that is connected to the 123.hp.com/ojpro8719 printer.
6. Plug in the power cable to the printer’s rear and into the wall outlet and then switch on the printer.
7. Set your preferred language, country/region and current date and time on the printer’s control panel.
8. After setting your preferences, press Yes to ratify your choice.
9. Eliminate the input tray from its position and then discard the packing materials, if any.
10. Place the plain paper into the input tray with short edge forward and print side down.
11. You should glide the paper width guides inwards until they rest against the edges of the paper.
12. After completing the above steps, push the input tray into the printer.
13. Use the ink cartridges that came along with the printer box.
14. Initially access the ink cartridge access door.
15. Halt for a minute until the carriage is silent. Now, take out the ink cartridge from the package.
16. Install the 123.hp.com/ojpro8719 ink cartridges to their respective slot and ensure that it clicks into place.
17. Redo the above procedure for other ink cartridges also
18. After completing the above steps, shut the ink cartridge access door.
19. Download and install the printer software from our website. Try to print the alignment page from the computer until prompted by the printing software.

How to Install HP Officejet Pro 8717

1. Remove the printer from the box, and then unwrap all tape and packing materials from the printer.
2. Mount the duplexer in a proper place into the printer.
3. Once you are done with the installation of your duplexer, connect the power cord and then set your preferences.
4. Insert the paper into the Tray 1. Ratify that the print side is facing downward and the short edge is forward.
5. After completing the download procedure, install the printer driver and software. You can use the instructions displayed on the screen for easy installation.
6. In case the HP Easy Start app gets enabled but it fails to download the 123.hp.com/ojpro8717 printer driver, and then ensure that the computer has an Internet connection and attempt to download again.
7. During installation, you must select your connection based on your preference, choose USB, Wired or Wireless connection.

How to Install HP Officejet Pro 8716

1. Take away the printer from the box, and then remove all the tape and packing materials from inside the printer.
2. Place the duplexer in a correct position into the printer.
3. After installing the duplexer, connect your power cord and set your preferences.
4. Place the paper into the Tray 1. Confirm that the print side is facing downward and the short edge is forward.
5. Do not load the paper above the yellow dotted lines on the sides of the paper tray.
6. Mount the paper into Tray 2.
7. Mount the ink cartridges into its respective slot.
8. Download the update the 123.hp.com/ojpro8716 printer driver and software from our website.
9. Get directed to our website, enter your printer model number and look for the updated printer driver and software.
10. After completing the downloading process, install the printer driver and software. Go through the instructions displayed on the screen for trouble-free installation.
11. In some cases, the HP Easy Start app gets enabled but it fails to download the driver, then ratify that the system has an active Internet connection and attempt to download again.
12. During installation you need to choose your preferred connection type, you can choose USB, Wired or Wireless connection.
13. Access downloads folder and then start HP Easy Start file or the full feature printer driver .exe folder to commence the installation.
14. Initiate the connection to the printer and install the printer driver.
15. Choose the required printer from the list, tap Use or Print Using menu, select your printer name in the drop-down menu, and then click on Add option.
16. Complete the 123.hp.com/ojpro8716 installation process. Once you are done with the installation, use the printer to print your essential documents or images.

Install HP Officejet Pro 8660

Step 1 : Take Away the HP Officejet Pro 8660 Printer from the Box.

After removing the printer from the box, detach all tape and packing materials from the outer portion of the printer.

After unwrapping the sticker on the control panel display, keep your fingers into the slot available on the left side of the printer, and then pull in such a way that you get access to the ink cartridge access door.

Take away all tape and packing materials from the interior part of the printer.

Shut the ink cartridge access door.

Step 2 : Install the Duplexer

Remove the duplexer and then take away the tape from it.

Switch on the printer so that the back faces you.

Grasp the duplexer by its sides with the rollers toward the 123.hp.com/ojpro8660 printer, place it into the rear of the printer, and then slide the duplexer into the printer until it quickly falls into place.

Move the printer in such a way that the front faces you.

Step 3 : Installing Tray 2

After detaching the tray 2 from its box, keep it on a flat, level surface.

Raise the printer and then keep it on top of the paper tray.

Step 4 : Link the Power Cord and Customize your Preferences

Link the power cord to the back of the printer, and then 123.hp.com/setup 8660 the other end of the power cord into an electrical outlet.

Switch on the printer.

After tapping your preferred language on the printer control panel, tap Continue.

Choose your specific country/region. Tap Continue.

Tap Date and Time and then set the month, day, and year.

Tap Done.

Step 5 : Mount paper into Tray 1

Hold the bottom of Tray 1, and then pull out the tray.

Touch the paper width guide tabs, and then bring the paper width guides to their outermost positions.

Mount plain white paper in the tray. Ensure that the 123.hp.com/ojpro8660 print side faces down and the short edge is in the front position.

Position the paper width guides inward so that they are placed conveniently on the edges of the paper.

Bring the tray toward the printer until it locks into position.

Bring out the output tray extender, and then lift the paper catch.

Step 6 : Insert Paper into Tray 2

Hold tightly the bottom of Tray 2 and then pull out the tray.

Bring out the paper width guides to their outermost positions.

Place a pile of plain white paper in the center of the tray. Take care that the print side is facing down.

Place the paper guides so that they rest against the edges of the paper.

Without giving pressure reload the tray into the HP Officejet Pro 8660 printer.

Bring out the output tray extender, and then lift the paper catch.

Step 7 : Installing the HP Officejet Pro 8660 Ink Cartridges

Keep your fingers into the slot on the left side of the 123.hp.com/ojpro8660 printer, and then access the ink cartridge access door.

Halt until the printer is idle and silent.

Take away the ink cartridge from its package.

Hold the ink cartridge by its sides with the nozzles facing towards the printer. Place the ink cartridge into its slot, and then bring the ink cartridge forward until it falls quickly into place.

Re-iterate these steps to setup all the new ink cartridges.

Shut the ink cartridge access door.

Give time for the printer to align the ink cartridges.

How to Install HP Officejet Pro 8713

Once you purchase a new printer, take off the printer and all the packing materials from the box. Plug the power cable, set the control preferences and insert the paper into its corresponding input tray. Install the ink cartridge, download and install the HP Officejet Pro 8713 printer software.

1. Take off the printer from the box, and then take away all tape and packing materials from inside the printer.
2. Mount the duplexer in a correct position into the printer.
3. After installing the duplexer, link your power cord and set your preferences.
4. Position the paper into the Tray 1. Ensure that the print side is facing downward and the short edge is forward.
5. Do not fill the paper above the yellow dotted lines on the sides of the paper tray.
6. Place the paper into Tray 2.
7. Place the ink cartridges into its respective slot.
8. Download the update the printer driver and software from our website.
9. Get directed to our website, enter your printer model number and look for the updated 123.hp.com/ojpro8713 printer driver and software.
10. Once you are done with the downloading process, then install the printer driver and software. Make use of the instructions displayed on the screen for easy installation.
11. In some worst case, in case the HP Easy Start app gets enabled but it fails to download the driver, then confirm that the computer has an active Internet connection and attempt to download again.
12. During installation you need to select your preferred connection type, you can select USB, Wired or Wireless connection.
13. Access downloads folder and then commence HP Easy Start file or the full feature printer driver .exe folder to start the installation.
14. Initiate the connection to the printer and install the printer driver.
15. Select your printer from the list, select Use or Print Using menu, select your printer name in the drop-down menu, and then tap on Add option.
16. Complete the installation process.
17. Once you are thru with the installation process, use the 123.hp.com/ojpro8713 printer to print your essential documents or images.

How to Install HP Officejet Pro 8710

1. For Unboxing 123.hp.com/setup 8710, Separate the printer from the box, eliminate the packing materials from the box which comes with the printer.
2. Grasp either side of the handles and access the ink cartridge access door till it fits into place to remove all the tapes and packing materials from inside the printer.
3. The cartridge access door should be closed.
4. Link the power cord to the back of your hp officejet pro 8710 printer, and then link the other end of the power cord into the electrical supply. Subsequently, power up the printer.
5. Access the input tray to place the stack of unused paper with the proper width guides.
6. Get access to the ink cartridge access door. You should touch only the black plastic on the ink cartridge until it placed properly. Subsequently, close the ink cartridge access door.
7. After completing the installation of 123.hp.com, ink cartridges the printer prints an alignment page by itself.
8. Best quality can be attained by aligning the ink cartridge.
9. Unlock the scanner lid.
10. The alignment page is located in such a way that the printed side faces down on the scanner glass. Mount it based on the inscribed guides around the glass.
11. The ink cartridges should be placed based on the printer model.
12. Trail the instruction to install the 123.hp.com/ojp8710 printer software.
13. The printer software should be installed.
14. The printer should not be linked to the computer until you are guided to do so.

Install HP Officejet Pro 8640

Step 1 : Unwrap the Printer from the Box
After taking away the 123 HP Officejet Pro 8640 printer from the box, don’t neglect to remove the packing materials from both inside and outside of the printer. Don’t forget to see the packaging for a list of things shipped in the box. You can take away the sticker available on the control panel display. The ink cartridge access door should be opened in an unhurried manner for removing all tapes and packing materials found inside the 123.hp.com/ojpro8640 printer. Ensure that you shut the ink cartridge access door.

Step 2 : Set Up the Duplexer for Use

1. After taking the duplexer from the box, position it so the back faces you.
2. Perform activities like grasping the duplexer by its sides, also ensuring that the roller is facing the printer. Position the duplexer in the back of the printer, and then push it into the 123.hp.com/ojpro8640 printer until it falls quickly into position.
3. Now bring back the printer to its normal position.
4. You may also install tray 2 if the option is provided.

Step 3 : Link the Power Cord and Personlize your Preferences

1. Don’t attempt linking a USB at this point. If you wish to use a USB cable to link the printer to the computer, the installer urges you to link it at the correct time during the HP Officejet Pro 8640 software installation.
2. Link the power cord to the back of the printer, and then attach the other end of the power cord into an electrical outlet.
3. Power o the HP OJ Pro 8640 printer.
4. You can select your preferred language from the printer’s control panel.
5. Swiping enables you to choose your country.
6. You can customize the date, time, month, day, and year.

Step 4 : Fill Paper into Tray 1

1. Grasp the bottom of Tray 1, and then pull it out.
2. After mildly touching the paper width guide tabs, adjust the paper width guides to their outermost positions.
3. Mount plain white paper in the tray. Confirm that the 123 HP ojpro8640 print side is positioned in a downward manner and the short edge is forward.
4. If necessary, adjust the paper width guides inward so that they are placed on the edges of the paper.
5. Orient the tray toward the 123.hp.com/ojpro8640 printer until it clicks into place.
6. Access the output tray extender, and then elevate the paper catch.
7. Mounting paper into tray 2 is an optional method.

Step 5: HP Officejet Pro 8640 Set Up the Ink Cartridges for Use

1. Pull the slot available on the left side of the printer and access the ink cartridge access door.
2. Give some time for the printer to be steady.
3. The handling of the sides of the ink cartridge should be the focus now. Here, the nozzles should face towards the printer. Now place the ink cartridge into its slot, and the push it forward until it falls quickly and firmly into place.
4. Ensure that the ink cartridge access door is shut.
5. The 123.hp.com/ojpro8640 printer will now align the cartridges and prints an alignment page.
6. After the alignment is complete, the printer prints an alignment page.

How to Install HP Officejet Pro 8630

Step 1 : Unwrap the Printer from the Box
After taking away the 123 HP Officejet Pro 8630 printer from the box, don’t neglect to remove the packing materials from both inside and outside of the printer. Don’t forget to see the packaging for a list of things shipped in the box. You can take away the sticker available on the control panel display. The ink cartridge access door should be opened in an unhurried manner for removing all tapes and packing materials found inside the 123.hp.com/ojpro8630 printer. Ensure that you shut the ink cartridge access door.

Step 2 : Set Up the Duplexer for Use
After taking the duplexer from the box, position it so the back faces you.
Perform activities like grasping the duplexer by its sides, also ensuring that the roller is facing the printer. Position the duplexer in the back of the printer, and then push it into the 123.hp.com/ojpro8630 printer until it falls quickly into position.
Now bring back the printer to its normal position.
You may also install tray 2 if the option is provided.

Step 3 : Link the Power Cord and Personlize your Preferences
Don’t attempt linking a USB at this point. If you wish to use a USB cable to link the printer to the computer, the installer urges you to link it at the correct time during the software installation.
Link the power cord to the back of the printer, and then attach the other end of the power cord into an electrical outlet.
Power on the 123.hp.com/ojpro8630 printer.
You can select your preferred language from the printer’s control panel.
Swiping enables you to choose your country.
You can customize the date, time, month, day, and year.

Step 4 : Fill Paper Into Tray 1
Grasp the bottom of Tray 1, and then pull it out.
After mildly touching the paper width guide tabs, adjust the paper width guides to their outermost positions.
Mount plain white paper in the tray. Confirm that the 123.hp.com/ojpro8630 print side is positioned in a downward manner and the short edge is forward.
If necessary, adjust the paper width guides inward so that they are placed on the edges of the paper.
Orient the tray toward the printer until it clicks into place.
Access the output tray extender, and then elevate the paper catch.
Mounting paper into tray 2 is an optional method.

Step 5: HP Officejet pro 8630 Set Up the Ink Cartridges for Use
Pull the slot available on the left side of the printer and access the ink cartridge access door.
Give some time for the printer to be steady.
The handling of the sides of the ink cartridge should be the focus now. Here, the nozzles should face towards the printer. Now place the ink cartridge into its slot, and the push it forward until it falls quickly and firmly into place.
Ensure that the ink cartridge access door is shut.
The 123.hp.com/ojpro8630 printer will now align the cartridges and prints an alignment page.
After the alignment is complete, the printer prints an alignment page.

How to Install HP Officejet Pro 8625

Once you purchase a new printer you need to take out the printer and the packing materials from the box, plug the power cable. Based on your needs set the control preferences, mount the paper into its particular input tray, setup the ink cartridge, download the printer software and install it.

1. Remove the printer from the box, and then unwrap all tape and packing materials from the printer.
2. Mount the duplexer in a proper place into the printer.
3. Once you are done with the installation of your duplexer, connect the power cord and then set your preferences.
4. Insert the paper into the Tray 1. Ratify that the print side is facing downward and the short edge is forward.
5. Confirm that you do not place the paper above the yellow dotted lines on the sides of the paper tray.
6. Mount the paper into Tray 2.
7. Setup the 123.hp.com/ojpro8625 ink cartridge into its particular slot, and then position the ink cartridge in the correct position.
8. Download the upgraded printer driver and software from our website.
9. Visit our website, enter your particular printer model number and find the updated printer driver and software.
10. After completing the download procedure, install the printer driver and software. You can use the instructions displayed on the screen for easy installation.
11. In case the HP Easy Start app gets enabled but it fails to download the driver, and then ensure that the computer has an Internet 123.hp.com/setup 8625 and attempt to download again.
12. During installation, you must select your connection based on your preference, choose USB, Wired or Wireless connection.
13. Open download folder and then initiate HP Easy Start file or the full feature printer driver .exe folder to begin the installation.
14. Establish the connection to the printer and install the printer driver.
15. Pick your 123.hp.com/ojpro8625 printer from the list, tap Use or Print Using menu, choose your printer name in the drop-down menu, and then select Add.
16. Allow your printer to complete the installation process. Once you are done with printer setup, you can use the printer to print your essential documents.

How to Install HP Officejet Pro 8620

1. For Unboxing 123.hp.com/setup 8620, Take away the printer from the box. Ensure that you also take away all tape, stickers, and packing materials from the printer.
2. Analyze packaging for a list of required items.
3. Take away the sticker on the control panel display.
4. Open the ink cartridge access door.
5. Take away all tape and packing materials from the interior portion of the printer.
6. Gently shut the ink cartridge access door.
7. Recycle the packing items.
8. Remove the duplexer from its packing material, and then take way any tape.
9. Turn the printer from its normal position.
10. Insert the duplexer into the opening in the rear of the printer, and then push it into the printer until it falls quickly into place.
11. You may or may not install tray 2.
12. After you have installed the duplexer, connect the Officejet Pro 8620 printer into a power source, switch it on, and then personalize your preferences. This can be done with the help of the 123.hp.com/ojpro8620 control panel. You can set your language, country, date and time.
13. You can mount paper into tray 1 by holding its underside. The paper width guides should be adjusted in such a way that they are slided to their outermost positions.
14. Feed plain white paper in the tray.
15. If required, adjust the paper width guides inward so that they are conveniently placed on the edges of the paper.
16. Mounting paper into tray 2 is an option.
17. Now you can install the 123.hp.com/setup 8620 ink cartridges by keeping your finger into the opening on the left side of the printer. Then you can pull the opening to access the ink cartridge access door.
18. Give time for the printer to be steady.
19. Take away the ink cartridge from its package, insert it into its slot, and then push it forward until it clicks into place. Ensure that you maintain contact with the ink cartridge by its sides with the nozzles towards the OJ Pro 8620 printer.
20. You can install the other new ink cartridges in the same fashion.
21. After closing the ink cartridge access door, give time for the 123.hp.com/ojpro8620 printer to align the ink cartridges.
22. Then you can install the printer’s software.

How to Install HP Officejet Pro 8600

1. The Printer which is packed needs to be unsealed from the box and then take away the tapes.
2. Examine whether any plastic tapes are on the printer display and at the printer’s interior region.
3. Once it is over, you can take out the duplexer from the packaging and then take off all the bubble wrap and packing stickers.
4. Fix the duplexer in your HP Officejet 8600 printer by turning the printer in such a way that its hind side faces you.
5. It needs to be installed with ultimate care.
6. When the installation is over, switch on your HP printer in such a way that the printer’s front side faces you.
7. To switch on the 123.hp.com/ojpro8600 printer it needs to be connected to the wall outlet with the help of the power cable.
8. The one end of the power cable needs to be linked to the printer’s hind side while the other end is to be connected to the electrical wall socket.
9. Power up your printer and configure all the necessary settings on the printer display.
10. The paper tray needs to be installed into the feeder tray. Be heedful when you fill the paper tray with the paper.
11. The misplacing of paper into the paper tray causes paper jam problem.
12. It is obligatory to 123.hp.com/setup 8600 the ink cartridge into its slot so that the print job can be commenced.
13. It is not feasible to work with your printer without installing the HP printer software. Install the appropriate driver software for your printer to bring them to a working condition.
14. Employ the guides and install the appropriate HP Officejet Pro 8600 printer software for the printer.

How to Install HP Officejet Pro 8210

1. Cut the tape and ply back the carton flaps.
2. Keep aside the installation CD, setup poster, two-wire phone cable, and power cord.
3. Take out the setup cartridges and flip the carton to take out the printer.
4. Slide the plastic cover with the printer out of the box.
5. Fire up the printer after plugging it in the power socket.
6. Set your preferred options in the Language, Country, Date, & Time menu.
7. Unwrap the bundled cartridges without touching the electrical contacts.
8. Now, lift open the cartridge access door.
9. Tuck the ink cartridges in their corresponding slots and pull down the cartridge access door.
10. Draw the input tray outwards and load it with printing sheets.
11. Use the paper to align the length and width guides.
12. Touch OK, and the 123.hp.com/setup 8210 printer aligns and prints automatically.

How to Install HP Officejet Pro 8100

1. Remove the printer from the box and free off the printer from the packing materials.
2. Hold the either side of the handles so that you can access the ink cartridge access door till it fits into the place. By doing so, remove all the tapes and packing materials from inside the HP Officejet Pro 8100 printer.
3. The cartridge access door should be shut down.
4. Establish the connection between the computer and the printer using the power cord. Subsequently, switch on the printer.
5. Get access to the input tray to place the stack of unused paper with the proper width guides.
6. Open the ink cartridge access door. You are supposed to touch only the black plastic on the ink cartridge until it placed properly. Subsequently, shut down the ink cartridge access door.
7. Once the 123.hp.com/ojpro8100 installation of ink cartridge has been over, the printer prints alignment page on its own.
8. The best quality can be availed by aligning the ink cartridge.
9. Unlock the scanner lid.
10. 123.hp.com/ojpro8100 Setup and Installation
11. The alignment page is located in such a way that the printed side faces down on the scanner glass. Mount it based on the inscribed guides around the glass.
12. Lock the scanner lid, subsequently go to the control panel of the printer and tap Ok.
13. The ink cartridges should be placed based on the printer model which you own.
14. Trail the instruction to download and install the printer software.
15. The HP Officejet Pro 8100 printer should not establish connection to the computer until you are guided to do so.

HP LASERJET CP5225N SETUP

The first and the foremost step is to visit our website and choose your printer model from the list that appears on the control panel. Re-check if the OS version is correct.

Now, you need to Download the full feature software, under the Driver-Product Installation Software and to use the guided HP Download and Install Assistant, follow the on-screen instructions.

Tap the Download only option and click Learn more to download the printer driver on Windows, if ‘Installing Your HP Laserjet CP5225N Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.

In order to complete the setup choose the desired printer connection and based on your necessity, select the apt print job. Now, you can proceed to the next step.

If you want to install with the disc that had been shipped with the printer, ascertain that the disc has drivers supported in the operating system. For any clarification or support, contact our technical experts.

INSTALL HP LASERJET M750DN

You need to Click the Start button that can be found in the lower-left corner of the desktop. Note that Windows 10 virtually handles your driver updates through the Windows update utility.

Now, tap the Settings button that is on the left side of the Start menu. Select Update & security. If you are unable to view this option, select Home in the upper-left corner.

Select the Windows Update option that will be in the navigation menu on the left side of the window. Tap Check for updates so that Windows checks for any available updates, including updated drivers.

Tap Install updates to download the updates. Reboot the system if prompted. Once the driver update process is complete, you may notice Windows has successfully updated your driver software window.

Select the Close button. Also, close Device Manager. You can restart your computer, even if you’re not prompted to do so. Choose the desired network connection and then select the apt print job.

Install HP LaserJet P3005

1. Open the printer’s shipment box and take the 123.hp.com/ljp3005 printer out of the box.
2. Place it on a leveled or sturdy surface.
3. Verify the contents in the box as it varies based on the country/region.
4. Discard all the packing materials surrounding the box.
5. Connect the power cable between your printer and system.
6. Power ON your 123.hp.com/ljp3005 printer by pressing the Power button.
7. Set the language, country/region on the printer’s control panel.
8. Load plain sheets of paper on the main tray.
9. Install the new ink cartridges into their slots.
10. After a while, the printer prints an alignment page.
11. Install the software using the starter CD.

Install HP Laserjet Pro M148DW

1. Unpack the packaging box, and open the flaps to view the 123.hp.com/ljprom148dw printer.
2. Lift the printer carefully from the box, and place it on a flat surface for the ease of handling.
3. Peel off the tapes on the printer, and remove the film from the control panel.
4. Lower the front input tray, and move the guides in the center to the extreme ends.
5. Place a stack of plain sheets in the tray. You can place up to 250 sheets in the tray.
6. Adjust the guides such that they touch the edges of the sheets. Lower the output bin extender on the top of the printer.
7. You can close the tray if you have inserted letter sized paper. The tray doesn’t close with large or legal sized paper.
8. Connect the power cord’s one end to the printer’s rear port and the other end into the wall outlet.
9. Power on your 123.hp.com/ljprom148dw printer, and wait while it calibrates itself. Do not proceed until the printer is idle and silent.
10. Use the right arrow on the control panel to choose a language, region, and other preferences. Press OK after setting up each choice. The printer’s hardware setup is now complete.

Install HP LaserJet Pro MFP M29W

Are you looking forward for unboxing your new HP Laserjet Pro M29w printer? Just read and follow the upcoming instructions to set up your printer.

1. Go through the steps here to carry out the HP LaserJet Pro MFP M29W unboxing setup.
2. Take out the 123.hp.com/ljpm29w printer from its box. Open the access door of the cartridge and clear the packaging tapes from that area.
3. Remove the toner cartridge and then take out the clips from it.
4. Hold the sides of the toner cartridge and rock it in the forward and backward direction to distribute the toner.
5. Pull the orange label to take out the sealing tape from it.
6. Align the toner cartridge with the tracks in the 123.hp.com/ljpm29w printer and push it until it is properly seated.
7. Close the toner cartridge access area. Load the plain papers in the input tray by pulling down the output tray.
8. Pull out the input and output tray, and load a stack of plain paper in the input tray with the short end forward and the print side up.
9. Push in the stack into the tray until it stops. Slide in the paper width guides that they rest against the edges of the paper. Do not push them very far.
10. Attach the electrical plug to the back of your printer and attach the other end of it into an electrical socket. Turn it on. Now, download and install the most recent version of the printer software and go with the prompts.

HP Laserjet 2420 Unboxing Setup

Are you looking forward for unboxing your new HP Laserjet 2420 printer? Just read and follow the upcoming instructions to set up your 123.hp.com/lj2420 printer.

1. Remove the HP Laserjet 2420 printer from the shipment box and position the printer in a clean and flat surface.
2. Now, remove and discard the packing materials from the printer and open the scanner assembly.
3. Discard the protective foam in the printer’s toner cartridge access area.
4. Take hold of the toner cartridge and lay aside in a secure place for some time.
5. Proceed to remove the packaging inside the 123.hp.com/lj2420 printer. Later, grasp both sides of the toner cartridge and gently give a shake to scatter the toner powder.
6. Clear off the orange clip from the toner cartridge and peel off the orange sealing tape from the toner cartridge.
7. Install the toner cartridge in the cartridge tracks inside the printer and then push the cartridge until it is firmly settled.
8. Close the top scanner lid and attach the input tray to the printer.
9. Slide paper width guides to the outermost position and load a stack of A4 size paper. Push the guides until they rest against the paper.
10. Connect one terminal of the power cord to the rear of the printer and attach the other terminal into an electrical socket.
11. Press the Power button and turn on the HP Laserjet 2420 printer.
12. Now, click the link given on this site to download and install the printer software on your computer.

How to Install HP Laserjet m203dw

1. Cut the tape that covers the top of the 123 HP Laserjet m203dw printer box.
2. The flaps need to be opened.
3. Look for the setup flyer, toner cartridges and power cables in the box and remove them.
4. Set them aside and take the 123.hp.com/ljm203dw printer out carefully.
5. Remove the polythene material that surrounds the printer.
6. Look for the visible orange tape that surrounds the printer and peel them off carefully.
7. The input and output trays of the device need to be opened.
8. Establish the power connection by connecting the cord between your 123.hp.com/ljm203dw printer and computer.
9. Switch on the device and wait for it to become silent and idle.
10. Tear the packing that covers the cartridges and open the access door.
11. Place the cartridges in their respective slots.
12. Tap OK on the printer’s display and an alignment page prints.

HOW TO INSTALL HP LASERJET M725DN

You need to Click the Start button that can be found in the lower-left corner of the desktop. Note that Windows 10 virtually handles your driver updates through the Windows update utility.

Now, tap the Settings button that is on the left side of the Start menu. Select Update & security. If you are unable to view this option, select Home in the upper-left corner.

Select the Windows Update option that will be in the navigation menu on the left side of the window. Tap Check for updates so that Windows checks for any available updates, including updated drivers.

Tap Install updates to download the updates. Reboot the system if prompted. Once the driver update process is complete, you may notice Windows has successfully updated your driver software window.

Select the Close button. Also, close Device Manager. You can restart your computer, even if you’re not prompted to do so. Choose the desired network connection and then select the apt print job.

INSTALL HP LASERJET M527Z

FOR WINDOWS
   Download the printer driver with the link provided below the driver download option.
   Choose the name of the printer, language and operating system version from the pop-up list.Look for the available software and driver options,as the options may differ in accordance with the printer model.
   Now,select the driver item you need to install in the system.On the installation software screen,choose Download and then take the aid of the steps to install the HP Laserjet M527z printer software.
   You can also use the software installation CD that came with the printer’s shipment box.Place the software installation CD into the computer’s disc drive.Look for the .exe setup file to install the driver.
   Double-click on the setup file to initiate the software installation process.Once the installation process begins,trail the instructions mentioned on the screen to accomplish the driver installation.

FOR MAC
   There are two methods to install the printer driver in the Mac system.One of the methods is to use the software installation CD and the other method is to download the driver from our website.
   Keep the software installation CD into the computer’s disc drive.Look for the list of contents ,once the installation CD is inserted.Examine whether .dmg setup file is present in the drive.
   Now,double-click on the setup file to initiate the installation process.Take a glance at the on-screen instructions to accomplish the installation process and avail all the latest features.
   You can also visit our website to key in the 123.hp.com/lj m527z printer model number and operating system version to download the upgraded driver and software in the system to avail all the latest features.
   Once the file is downloaded,double-click on the setup file to install the printer driver in the system.Take the aid of the on-screen instructions to finish the driver installation.

INSTALL HP LASERJET CP4025DN

FOR WINDOWS:
   The first and the foremost step is to visit our website and choose your printer model from the list that appears on the control panel. Re-check if the OS version is correct.
   Now, you need to Download the full feature software, under the Driver-Product Installation Software and to use the guided HP Download and Install Assistant, follow the on-screen instructions.
   Tap the Download only option and click Learn more to download the printer driver on Windows, if ‘Installing Your HP Laserjet CP4025DN Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.
   In order to complete the setup choose the desired printer connection and based on your necessity, select the apt print job. Now, you can proceed to the next step.
   If you want to install with the disc that had been shipped with the printer, ascertain that the disc has drivers supported in the operating system. For any clarification or support, contact our technical experts.
 
FOR MAC:
   The primary step is to visit our website and choose your HP Laserjet CP4025DN printer model from the list that appears on the control panel and to ensure if the Operating System version is correct.
   Now, you need to choose the Download option next to the full feature software, under the Driver-Product Installation Software and to use the guided HP Download and Install Assistant, follow the on-screen instructions.
   Select HP Scan on the Install screen and then ensure that you tap the Add Printer option to create a print queue on your Mac system. This opens the Add window.
   Type your printer model, then ensure that you select the Use or Print Using menu option and then choose the printer model in the pop-up menu. Now, click the Add option.
   To complete the setup choose the desired network connection and then select the 123.hp.com/lj CP4025DN function based on your work requirement.

HOW TO INSTALL HP LASERJET M506N

FOR WINDOWS
   Go to start and search Windows for Change Device Installation settings, select yes and save changes to enable the computer to automatically update the driver software of your printer.
   To add the printer to Windows, connect the printer to the computer using the USB cable provided in the box and open Control Panel. Select the Devices and Printers menu. Click on the Add a Printer option.
   Select the name of your 123.hp.com/ljm506n printer from the list and click Next. Follow the on-screen instructions to finish the installation. Try printing a document using the printer to check if everything works properly.
   If your printer was not listed, click The printer I want is not listed and then on the Add a local printer or network printer with manual settings option. Click Next and select Use an existing port and then click Next.

FOR MAC
   To install the driver software on your Mac, you don’t have to download and install the driver software from the internet. You can directly install it using the Apple Software Update.
   Connect the printer to the computer via USB and click on the Apple icon and select System Preferences. Click on the Printers and Scanners menu and check if your printer is listed in the menu.
   If listed, select the name of your printer and remove it using the – sign at the bottom of the menu. To add the printer, click on the + sign and select the name of your HP Laserjet M506n printer.
   Select the Add Printer or Scanner option and choose the name of your printer. Click the Use or Print using option and click on the name of your printer. Click Add to add the printer to the list.
   Download and install any software if prompted. Try to print or scan a document.

How to Setup HP Officejet J3680 Printer

1. Open the printer box after purchasing from the manufacturer.
2. Check if the printer components are provided in it.
3. Take the printer and keep it on a flat & dust-free surface.
4. Open the paper trays.
5. Insert the faceplate of the control panel if needed.
6. Take a bunch of sheets and tap on a flat surface.
7. Keep the paper in the input tray.
8. Unpack the power cord and adapter provided in the printer package.
9. Connect the power cable. Power up the printer.
10. Power up the HP Officejet J3680 printer by force pressing its power button.
11. Unpack the ink cartridges given in the printer box.
12. Install the cartridges into their slots.
13. Arrange the print cartridges on the control panel of the printer.
14. Download and HP Officejet J3680 Setup the current version of the printer software on your computer.
15. Connect your printer and computer.
16. Link the printer to your phone jack using the cord provided in the printer box.
17. Configure the fax settings on complete the first time HP Officejet J3680 printer setup.

How to Setup HP Officejet 6962 Printer

1. Open the printer box and take the printer out of it.
2. Keep the printer on a flat surface otherwise, it may not receive enough power supply when connected.
3. Remove all tape covering in, around and on the printer.
4. Connect the printer with the power cord providing one end to the printer’s rear and the other end into an electrical source of the wall.
5. Load the required paper into the input tray and install the ink cartridges into the respective slots.
6. Turn on the printer so that it prints the alignment page to confirm the successful installation of ink cartridges.
7. In the end, install the printer driver using the software CD in the box and complete the HP Officejet 6962 Printer Setup successfully.