HP Officejet Pro 6968 Setup

HP Officejet Pro 6968 Setup

To know the procedure to set up and install the 123.hp.com/ojpro6968 printer, go through the steps explained below.

UNBOXING SETUP

• Unpack the 123.hp.com/setup 6968 printer and place it on a table or a flat surface. Make sure that the place you choose is free from dust and other dirt particles.
• Now, check if the additional components such as power cord, HP Officejet Pro 6968 driver installation disc, user-instruction manual, and ink cartridges are present.
• Remove all the packing materials like seals, tape, paper from the surface (operation panel) and internal parts of the printer (scanner glass, input tray).
• Keep the HP Officejet Pro 6968 setup printer box and other packing materials aside for recycling.

PROVIDING POWER SUPPLY

• Use the power cord that came along with your 123.hp.com/ojpro6968 printer to connect the printer to a power supply.
• Identify the ends to be connected to the rear of the printer and electrical outlet and plug them accordingly.
• Turn your 123.hp.com/setup 6968 printer on and wait until it remains silent. The operation panel on your printer will turn active.
• Set the printer preferences on the control panel. Select your preferred language and the country you live in.
• Fix the Date/time if prompted. Do not forget to confirm your selection by pressing the Yes option.

INSTALLING INK CARTRIDGES

• Keep your ink cartridges handy before you begin to install them. Use the cartridges that came with your 123.hp.com/ojpro6968 printer. Else, a cartridge error may occur.
• Lift the ink cartridge access door until it stands on its own.
• The moving carriage will stop after a few seconds. Do not tend to stop it with your hands.
• Shake the cartridge gently before you unwrap it. Shaking the cartridge after unwrapping may lead to leakage of ink.
• Hold the 123.hp.com/setup 6968 printer ink cartridge only by its sides.
• Pull the orange pull-tab. The direction to pull the tab will be mentioned on the tab.
• Now, twist the protective cap (orange colored) in an anticlockwise direction to remove it from the cartridge.
• Make sure that you are not touching the sensitive parts of the cartridge such as the ink nozzles and copper-colored contacts.
• Insert the ink cartridges into the respective slots with the contact side facing downwards.
• You can see labels on the slots. The color of the cartridges should match with the label.
• After installing all the ink cartridges, close the 123.hp.com/setup 6968 cartridge access door.

LOADING PAPER

• The HP Officejet Pro 6968 setup printer input tray will be present at the bottom of the machine. You need to raise the output tray to drag the input tray outwards.
• Two vertical strips (paper width guide) will be present on the input tray. Slide them apart to its outermost position.
• Load unused plain paper into the input tray. Make sure you align the paper stack before you load them.
• Compress the paper width guides to secure the paper loaded.
• Once loaded, push the input tray back into the machine and release the output tray.

ALIGNING INK CARTRIDGES

• Press OK when a 123.hp.com/ojpro6968 printer alignment message appears on the display screen once you have loaded the paper.
• Take the printed alignment page and place it on the scanner glass along the engraved guides. The printed side should face the scanner glass.
• Cover the scanner glass with its lid and touch the Scan button. The printer will now align on its own.

HP Officejet 3830 Printer Setup

Quick HP Officejet 3830 Printer Unboxing and Setup Guide

The 123.hp.com/oj3830 provides you with print, copy, scan, and fax operations. It has a 4-ink system with an input tray that can hold up to 60 sheets at a time. You can connect it to the computer with the help of a wired or wireless connection. The setup and installation process will be very easy if you follow the steps given here.

• Firstly, observe the seal of the 123.hp.com/setup 3830 printer package.
• If it is not intact, then you should replace it with a new 123 HP Officejet 3830 printer.
• Else, open the seal of the package using a knife.
• Do not forget to verify if the additional accessories such as power cord, USB cable, warranty card, setup guide, and ink cartridges are available in the package.
• Keep it aside and take the HP Officejet 3830 setup printer out of the box.
• Discard the styrofoam sheets present around it and remove the plastic wrap.
• Place it on a steady surface and peel the blue tapes that are outside and inside the printer.
• Take the power cord and insert one end to the printer. The other end should be attached to the power supply.
• Turn on the 123.hp.com/setup 3830 printer using the Power button.
• Set the preferences in the succeeding screen.
• Pull the cartridge access door and wait until the carriage stops moving.
• Unpack the new cartridges provided and insert it in the respective slots. Close the access door.
• Load plain papers in the input tray after aligning them on a flat surface. Take a test print.
• Next, download the drivers necessary and install them on the computer to connect it to your 123.hp.com/oj3830 printer.

Simple Steps for HP officejet Pro 6968 Installation

HP Officejet Pro 6968 Install

Printer installation includes both hardware and software. Use the tips which are given below to HP Officejet Pro 6960 Installation printer easily. Procedures to link the printer

HP Officejet Pro 6968 installation for Windows

• Initially ,you need to install the upgraded printer driver and software in the system for 123.hp.com/setup 6968 install.
• Trail the instructions mentioned on the screen to install the printer driver. Select the connection type when prompted.
• Choose any one among the wired or to connect your printer to a network.
• Wired Connection : Link the one end of the Ethernet cable to the printer’s Ethernet port and other end to the router’s rear.
• Wireless connection: Key in the name of the network name and password for linking the printer over the wireless network.
• After installation, add the printer to the network by locating its name.
• On the Windows system, select the start button and select Devices and Printers option.
• Click on Add a Printer option. Once you click on the option, the Add 123.hp.com/ojpro6968 printer Wizard screen displays. In the Add, a Print Wizard screen, select Add a printer option. Select the name of the printer which is automatically detected.
• Once you select the printer’s name, the printer is added to the list of available devices for HP Officejet pro 6968 install.

Complete Guide to Install HP Officejet Pro 6960

HP Officejet Pro 6960 Installation

Printer installation includes both hardware and software. Use the tips which are given below to 123.hp.com/setup 6960 Installation printer easily. Procedures to link the printer.

HP Officejet Pro 6960 installation for Windows

• Ensure that the printer is powered on. Use a USB cable that is less than 3m in length or make use of the cable that came with a box.
• Link the USB cable directly to the USB port on your system. When you link it to a hub the printer may not receive the required power supply.
• Prior to linking the printer to the computer, ensure to remove any previously installed versions of the printer from Windows and then use steps to install the printer.
• Until it is instructed, do not connect the printer to the system. If you connected it previously, use the tips which are given below to remove it from the list.
• Unplug the 123.hp.com/ojpro6960 USB cable from the system and do not link it back until you install the printer driver. Look windows for Devices and Printer and click Devices and Printers from the list.
• Right-click on the printer model and click remove device. Your devices get removed from the list. Install the required printer driver software with the link provided on this site for HP officejet pro 6960 installation.