How to Install HP Laserjet Pro M402dn

123 hp.com/Laserjet Pro m402dn unpack the printer. 123 HP Laserjet Pro m402dn place the printer in a well ventilated, dust-free area, and away from direct sunlight. The temperature range of the printer is 17.5o C to 25o C. The humidity range is 30% to 70%. Maintain enough space around the printer to open all trays and doors. Take the printer out of the box and remove all the packaging materials. Keep the packing materials aside for recycling. Use only the power cable that is provided with the printer.

123 HP Laserjet Pro M402dn Unboxing Setup

Once the 123 hp.com/Laserjet Pro m402dn printer is bought. Place the box on a flat surface. Break the seal and open the box on 123 HP Laserjet Pro m402dn printer.
You will find a hardware setup poster which contains the basic steps 123 hp setup Laserjet Pro m402dn for setting the printer. An Installation CD to install Laserjet Pro m402dn software for both Windows and MAC is provided.
A support guide with phone numbers and websites for contacting HP technical support is provided. A power cord is provided ensure that you use the same for the printer. A USB cable for connecting your printer to the computer is given.
Use the cable during software installation. Lift the box and take the printer out of the protective bag. Remove the visible orange color packaging tape and the protective cover on the HP logo.
The 123 hp.com/Laserjet Pro m402dn printer has two protective trays. Open the tray and load the paper onto the tray.

How to Install HP Laserjet Pro M277dw

The 123 hp.com/Laserjet Pro m277dw printer is provided with a CD disk which contains steps to install the software, instruction manual, ink cartridges and power cable. The 123 hp.com/setup m608dn process involves unboxing the seal, 123 HP Laserjet Pro m277dw printer installation, loading the paper into the paper tray, etc. Avoid the printer to be exposed to direct sunlight and place the printer in a dust free area. Keep the printer on a flat surface and ensure that it meets all requirements like temperature, etc.

123 HP Laserjet Pro M277dw Unboxing Setup
Once the printer is bought ensure that it has a licensed seal on it. In case if the seal is absent send the printer for replacement. Make sure that there are no damages on the 123 HP Laserjet Pro m277dw printer. Open the box by breaking the tape and unsealing it.
A sheet on how to unload the 123 hp setup Laserjet Pro m277dw printer is provided. An installation CD for both Windows and MAC is available.
A setup poster which contains the basic instructions for your printer has been provided. A warning sheet on how to get support for your printer for various regions and papers with additional information about your printer and a getting started guide is given. A USB Cable is provided for direct connection between your computer and printer.
A two-wire phone cable for setting up the fax line and finally a power cord for supplying power to the printer. Use only the given power cable for your printer.
Take the printer out of the box and place it on a flat surface. Remove all the orange tapes that are visible and the paper tapes around the ADF’s paper guides. Slide out the paper tray and slide the width guides to the outermost position.
Place the paper inside the tray and push it in. Remove the protective plastic cover present over the HP Logo.

How to Install HP Laserjet Pro M254dw

123hp.com/Laserjet Pro m254dw does not work until you install the necessary drivers and software. The drivers for the printer can be downloaded. Choose a dust free area for the printer. Do not expose it to direct sunlight. You will find an installation CD which contains steps to install the 123 HP Laserjet Pro m254dw printer software, it also has an user guide and legal guide. A multi-lingual support guide with toll-free numbers for different areas is provided. A setup guide which contains step by step points for setting up the printer is given. A USB cable for connecting the printer to your computer. 123hp.com/setup m254dw has a quick convenient printing with extraordinary features.

123 HP Laserjet Pro M254dw Unboxing And Setup

Once the 123 HP Laserjet Pro m254dw printer is bought break the tape and open the box. A manual will be given on how to set up the 123 HP setup Laserjet Pro m254dw.
Remove all the packed, unwanted materials, and the film from the control panel. Keep the packing materials for recycling.
Pull the tray out and slide the paper length and width outward. Slide the paper until they stop at the edges of the paper.
The paper length and width guides can be adjusted. Remove the plastic cover from the HP logo. If you are going to set the printer for faxing use the power cord.
Insert the paper tray to the printer. The stack height can be changed. Plug the printer and set your necessary references.

How to Install HP Laserjet Pro M227fdn

Printing came into existence since 19th century. Since then Hp always stay as a distinct platform introducing multiple models of printers. The 123.hp.com/Laserjet Pro m227fdn printer came into market for businesses to flourish. The first time set up the 123 HP Laserjet Pro m227fdn setup, would be interesting. Carefully take out the printer and all its packing materials from the printer box, load documents into the input tray, connect the power cord, set control panel preferences, and then download and initiate the installation of the printer software.

123 HP Laserjet Pro M227fdn Setup And Unboxing

In simple terms, unboxing is an art of removing a newly purchased product from its packaging.

Delicately take out the 123.hp.com/Laserjet Pro m227fdn printer from the box and remove all the plastic coverings and tape on the 123 HP Laserjet Pro m227fdn printer.
Now, you would find a power cord wrapped in its covers. Make sure that you take out the power cord and place it cautiously on a nearby table.
Take out the ink cartridges. Carefully load documents that needs to be printer into the paper tray.
Ensure to set the preferences on the printer control panel. And if prompted on the printer screen, select the date and time, and then touch Yes to confirm your choice.
123.hp.com/Laserjet Pro m227fdn printer set-up is now ready for printing. You could go ahead and enjoy the rest of your day with the best printer in the terrain.

How to Install HP Laserjet Pro M226dw

Do you think setting up your 123.hp.com/Laserjet Pro m226dw printer is a tedious job? Do not worry as the procedure is quite simple. Remove the 123 HP Laserjet Pro m226dw setup printer, then look for the list of items in the contents and then remove all the unwanted packing materials from the printer. Place paper into the input tray and then form the power connections. Here is the detailed procedure you can follow.

123 HP Laserjet Pro M226dw Printer Unboxing

Once you discard the unwanted tapes from the 123 HP Laserjet Pro m226dw printer, place it in an even, well-ventilated, dust-free place away from direct sunlight.
Take out the power cord from the box. You may also view an installation guide inside the box.
Thoroughly shake the cartridge and then remove the orange clip from it.
Once you remove the sealing tape from the cartridge, insert it into the slot. Load a stack of paper free from damage or wrinkles into the input tray.
Adjust the paper guides, then connect the power cord and then turn on the 123 HP Laserjet Pro m226dw printer. Set your preferences and then print a test page.

How to Install HP Laserjet Pro M201dw

Once you receive a new 123 HP Laserjet Pro M201dw setup printer, the initial process you have to do is unpacking. After that, you need to setup the printer. The printer setup includes both hardware and software. We provide simple tips to easily setup the printer. Make use of it and get your printer ready to print the desired document.

123 HP Laserjet Pro M201dw Printer Unboxing

Make use of the instructions that are listed below and do the unboxing setup for your 123 HP Laserjet Pro M201dw printer.
Take the printer out of the box and then unwrap the packing materials from the printer and its components.
If your HP Laserjet Pro M201dw setup printer has a duplexer, position it properly in the allotted slots. Check whether the cartridges are free from dust. Insert the toner cartridge into the slot.
Load sufficient papers into the printer’s input tray. Make sure that the papers you have placed are compatible with the printer.
Download and install the printer software to start the printer function. Go through the on-screen prompts to install the updated driver on your Windows or Mac computer.

How to Install HP Laserjet Pro P1108

The printer setup guides are offered for the customer’s benefit. The process includes the instructions like network connection, 123 HP Laserjet Pro P1108 ink cartridge installation, hardware assembling, and printer software installation. You can easily set up the printer by following the guides that are displayed on this website. For more information, give us a call at the Toll Free: (877) 389-3239.

123 HP Laserjet Pro P1108 Unboxing Setup

Make use of these procedures to set up the printer. Customize the printer and start printing a document with the 123 HP Laserjet Pro P1108 printer.

Usually, the printer and its components are packed well when they arrived at your doorstep. Remove all the plastic tapes and stickers from the printer.

Plug-in one end of the power cord to the printer’s rear end and the other end to the power supply. After establishing the connection, based on the needs, you can set the preference on the printer’s control panel.

Place the toner cartridge into the slot properly. Make sure that the cartridge is free from dust. Use a genuine cartridge to print your documents.

Load the paper into the printer’s input tray. Check whether the papers are with the accepted size and type. Download and install the updated 123 HP Laserjet Pro P1108 printer driver. For any queries, contact us at our experts.

How to Install HP Laserjet Pro M128fn

Setting up your 123.hp.com/Laserjet Pro m128fn printer is quite an easy task. Take out the HP Laserjet Pro M128fn setup printer from the box, then look for the contents of the box and then remove all the unwanted packing materials from the printer. Load a stack of A4 size paper in the input tray and then form the power connections. You can go through the steps given below.

123 HP Laserjet Pro M128fn Unboxing Setup

Discard all the tape from the HP Laserjet Pro M128fn setup printer and then place it in a sturdy, well-ventilated, dust-free place away from direct sunlight.
Now, lift the scanner assembly, then open the top cover and then remove the protective foam from the cartridge access area.
Take out the cartridge and set it aside in a secure place. Shake the cartridge well and then remove the orange clip from it.
Now, pull out the orange tab. This is to remove the sealing tape from the cartridge. Insert the cartridge into the slot, then close the top cover and then close the scanner assembly.
Load a stack of paper into the input tray and adjust the paper guides such that they bind the paper. Plug in the power cord, then turn on the HP Laserjet Pro M128fn setup printer and then set your language. Now, click OK.

How to Install HP Laserjet Pro M127fn

After opening the printer’s box, place the 123 HP Laserjet Pro m127fn printer carefully on the flat surface and then using the manual instructions set the control panel preferences, load paper into the paper tray, install the toner cartridges and download the driver and software for HP Laserjet Pro m127fn Setup. The best manual for your printer is available on this website. Click the link and download the laserjet pro m127fn printer manual.

Steps: HP Laserjet Pro M127fn Setup

After unboxing your Laserjet Pro m127fn printer, make use of the instructions that are guided below in step by step manner to complete the entire printer setup.

Open the box, take out the HP Laserjet Pro m127fn setup printer and remove all the packing materials found inside and outside the Laserjet Pro m127fn printer.
Press the power button to switch on your printer and then set the control panel preferences for your printer.
Once you have set the preferences, load enough amount of paper into the paper tray and close it properly.
Take out the ink cartridges from the printer’s cardboard box and install them in your 123 HP Laserjet Pro m127fn printer correctly.
Once done with installing the toner cartridges, align them and then complete the printer setup by installing the 123 HP Laserjet Pro m127fn printer driver and software.

How to Install HP Laserjet Pro M126nw

Once you have taken the 123 HP Laserjet Pro M126nw printer out from its cardboard box, you can use the manual or the instructions that are described below to complete the entire set up for your printer. You can download the updated printer manual from this website. Click the manual download link on the page and download the 123.hp.com/laserjet m126nw printer manual.

123 HP Laserjet Pro M126nw Install And Unboxing

In simple step by step format, the procedure for setting up your printer for the first time is described. Complete your Laserjet Pro m126nw printer setup by doing the instructions accordingly.

• Open the box and take the 123 HP Laserjet Pro M126nw printer out from it and then remove the stickers, tapes, and the packing materials from it.
• Recycle all the packing materials removed from the printer and then press the power button to turn on your printer.
• Set the Laserjet Pro m126nw printer’s control panel preferences and then place an adequate amount of plain paper in the paper tray.
• After completing the paper loading in your paper tray, install the toner cartridges that shipped with your Laserjet Pro m126nw printer.
• Once the toner cartridges are installed in your printer, align them for better print quality. Then install the driver and software.

HP Laserjet Pro M1136 Install

Do you want to setup your 123.hp.com/Laserjet Pro m1136 printer? Once you remove the printer from the box, look for the contents behind the box and then discard all the unwanted packing materials from the 123 HP Laserjet Pro M1136 printer. Now, keep the cartridge and the output bin ready for installation. Insert plain paper in the input tray and then form the power connections. The step-by-step procedure is given below.

123 HP Laserjet Pro M1136 Unboxing Setup

The foremost step is to remove the 123 HP Laserjet Pro M1136 printer from the box and then verify the contents of the box.
Discard all tape from the printer, then open the cartridge access door and then take out the cartridge from its package.
Carefully remove the orange clip from the end of the cartridge and then shake it back and forth to distribute the toner evenly.
Insert the cartridge, then close the cartridge door and then insert the output bin extender into the output bin.
Load the paper with the print side facing up, then connect the power cord to the back of the 123 HP Laserjet Pro M1136 printer and then press the Power button.

How to Install HP Laserjet Pro M132a

The 123hp.com/LaserJet Pro m132a lets you print, copy, and scan. Setting up your LaserJet Pro is a multi-stage process. It includes unpacking the 123 HP Laserjet Pro M132a printer, installing the input tray dust cover, placing paper in the input tray, connecting the power cord, assigning your preferences, and installing the printer driver and software. Ensuring that your printer is set up correctly, makes sure that you get the best out of your 123 HP LaserJet Pro m132a.

• Unpack the 123 HP Laserjet Pro M132a printer from the box and remove all tapes, stickers and other packing materials from the 123 HP LaserJet Pro m132a.
• Draw out the input tray door. Pull the dust cover out from the printer with care, and then peel the tape from the dust cover.
• Unfold the sides of the dust cover. Force the sides of the dust cover inward until they snap into position.
• Position the dust cover hinge pins with the hinge slots in the input tray area, and then push the pins into their designated slots until they snap into position.
• Place paper into the input tray. Connect the power cord and set your preferences and install the 123 HP Laserjet Pro M132a printer driver and software to complete your 123.hp.com/setup m132a.

How To Install HP Laserjet M1005

Installing the HP Laserjet Software on a Mac or Windows system is not a difficult task. After performing the hardware of the printer such as ink cartridges, loading papers into the tray, etc., you will have to install the printer driver that is appropriate for your Laserjet printer. Ensure that you connect your printer to a secured network. The driver file format for Windows and Mac system are .exe, and .dmg respectively. You have to install the updated printer driver to experience uninterrupted printer functions. You can also enable the auto-update feature on your system. Find below the quick steps for how to install HP Laserjet m1005 mfp printer.

1. Download the HP printer driver that is compatible with your OS.
2. Press the Download button next to the chosen file.
3. Wait until the selected driver is downloaded.
4. Verify whether the network strength is good.
5. Double-click on the HP Setup file to begin the installation.
6. Install any additional software if necessary, that came with your driver package.
7. Choose a connection type from Wired and Wireless when you are prompted to do so.
8. Wait until all the files get installed completely.
9. Accept the Terms and Conditions to complete the installation process.
10. Press Finish and start performing the printer functions.

How to Install HP Officejet Pro 6830

Get excellent quality printouts in text and images using the Officejet 6830 printer. Enhance the productivity of your working environment with this 123.hp.com/ojpro6830 printer. Easy access to the settings is done with the help of the touchscreen control panel. Use printing, scanning, copying and faxing features from a single device. Frequent feeding and flipping of pages are not required using the Automatic Document Feeder Tray.

Open the 123.hp.com/ojpro6830 printer’s shipment box by removing the tape on the top of it. Take out the printer from it. Place the printer on a flat surface.

Discard all packing materials from the interior and exterior of the printer. This packaging is done to prevent the damage to the device during transportation.

Connect the power cable of the printer to the rear end of the device and to the wall socket. Press the Power button to switch on the printer.

Insert plain sheets of paper into the input tray. Adjusting the paper using the paper-width guides for the alignment of the papers.

Install the ink cartridges into the corresponding slots. After installing, wait till the 123.hp.com/ojpro6830 printer starts printing an alignment page.

How to Install HP Officejet Pro 6230

Plug in the 123.hp.com/ojpro6230 printer to your system using a USB cable. Once you take out the Officejet Pro printer from the box, form the power connections and then insert the ink cartridges. Insert the paper into the input tray and then align the ink cartridges. After verifying the status of your 123 HP Officejet Pro 6230 printer, install the printer software on your OS and connect HP Officejet Pro 6230 to wifi by following the on-screen instructions.

Once you unbox the 123.hp.com/ojpro6230 printer, look at the back of the box for a list of items as the contents may vary by country/region.

Make sure that you connect one end of the power cable to the Officejet Pro 6230 printer and the other end to an electrical socket.

After placing plain, white paper in the main paper tray, make sure that the stack of paper correctly fits the edges of the tray.

Remove the new ink cartridge from its wrap, then discard all the plastic wrap from it and then insert it into its corresponding slot.

Now, select the Setup option on the control panel, then click Align Cartridge and then choose the OK option. Also get the solution to connect HP Officejet Pro 6230 to wifi on the following instructions.

How to Install HP LaserJet MFP M528c

BASIC SETUP :

1. Unpack the HP LaserJet Enterprise Flow MFP M528c printer first.
2. Take out the printer supplies such as power cord, telephone line cord, and user guide from the package.
3. Remove the protective tapes and covers from the printer.
4. Press the top cover release button at the side of the printer to open the front door.
5. Take out the toner cartridge entirely from the printer and unpack the casing.
6. Roll the toner cartridge for five times and insert it into the printer after aligning the toner slot. 
7. Close the front door and open the paper input tray.
8. Load some plain paper into the paper input tray with proper guide-width adjustments. 
9. Close the paper tray and connect the network cable to the HP Laserjet MFP M528c setup if you wish to connect the printer over a wired network.
10. Avoid connecting the USB cable until prompted during the driver installation.
11. Now, connect the printer to the wall outlet using the printer's power cord and press the Power
12. Configure the basic printer settings using the printer's control panel and pull out the keyboard if needed.
13. Enable the USB port by selecting the Settings icon, followed by General.
14. Select the Enable Device USB option, followed by Enabled to enable the USB port.
15. Verify the printer functions by printing a Configuration
16. Install the printer software on your computer by downloading the HP Easy Start software from the official HP site.
17. Update the printer firmware if available.
18. For more information about the HP printer, tap the Helpbutton available at the top of the control panel screen.
19. For mobile printing, download and install the HP Smart appfrom the Google Play Store app or Apple App Store 

How to Install HP Laserjet Enterprise M507N

HP LaserJet Enterprise M507n is a monochrome printer that comes with a 650-sheet input tray, Easy-access USB port, color LCD panel, and mobile printing feature. The basic HP Laserjet Enterprise M507N setup process is quite simple by following the below-mentioned steps.

Unpack the printer first and take out the printer supplies.
Remove the protective tapes and covers from the printer.
Press the release button to open the front door and unpack the toner cartridge.
Rock the toner cartridge five times and insert it into the correct slot.
Pull out the paper input tray and load some plain paper with proper guide-width adjustments.
Re-fix the paper tray into the printer and connect the HP Laserjet M507n printer to the wall outlet using the power cord.
Connect the network cable if you wish to connect the printer to a network.
Make sure not to connect the USB cable until prompted during the driver installation.
Install the printer software on your computer and verify the printer functions by printing a sample document remotely from the computer to the printer.
For mobile printing, download and install the HP Smart app or other HP-supported apps from the Google Play Store app or Apple App Store app.

How to Install HP Laserjet MFP M632Z

Printer Unboxing:

Place the printer in a place where there is ample space to open the printer trays freely.
Unbox the printer and keep the other printer accessories safe.
Peel off all the orange protective tapes from the printer
Open the cartridge access door by pressing the release button and take out the cartridge drawer.
Remove the plastic and paper packaging materials from inside the printer and the cartridge.
Replace the cartridge drawer inside the printer and close the access door if you are not following the next step.

Install Toner Cartridge:

1. Open the cartridge access door, then draw the cartridge drawer.
2. Unpack the toner cartridge and remove all the packaging covers and sheets.
3. Then hold the cartridge by the handles and shake it to distribute the toner.
4. Insert the toner cartridge in the cartridge drawer and move the cartridge drawer into the printer.
5. Finally, close the cartridge access door.

Install Staple Cartridge:

1. In case you do not have a staple cartridge, skip this step.
2. If you want to install the staple cartridge, buy a staple cartridge from the store.
3. Keep the stapler cartridge door open.
4. Place the staple cartridge into the slot and see that it locks into the position.
5. And close the stapler door.

Feeding Paper in Tray-2:

1. Draw out the paper tray-2 and shift the blue holders to adjust the paper guides to the paper size you are loading.
2. Arrange the paper and place it in the tray, and verify if the paper level remains below the maximum limit indicator.
3. Move the paper edge guides to the paper edges, also check that the paper does not squeeze or bend.
4. After that, slide the tray inside the HP Laserjet MFP M632Z Setup.

Loading Paper in the HCI Feeder:

1. Pull the High Capacity Input feeder tray from the printer.
2. Alter the paper-size lever to set the position for the paper.
3. Place the paper stack into the feeder, and maintain the paper level within the maximum paper indicator.
4. Slowly close the feeder tray.

Set the Printer Stand:

1. Turn the tray lock on the front side, so that it secures the tray onto the printer.
2. Now, rotate the printer wheels, such that it aligns with the edges.
3. Cover the wheels using the wheel covers, and then unscrew the stabilizer leg, till it touches the floor.

Connect the Network Cable:

1. Only if you are using the wired network connection, connect an Ethernet cable from the router to the printer.

Fax Setup:

1. Attach the phone cord between the printer’s phone port and the telephone wall jack.

Basic Setup

1. After the printer turns on, the display panel shows the initial setup guidelines.
2. Set the language, date & time, region, and other basic settings.

Check printer settings

1. To check the printer functions, you can print the report on the printer.
2. Go to the Reports menu on the printer’s display, and select the Configuration or Status Pages menu.
3. Following that, choose Configuration Page and select Print.

Power Connection:

1. Connect the power cord between an electrical wall socket and the HP Laserjet MFP M632Z setup.
2. To switch on the printer, press the power button.

Update Firmware and Install Software:

1. When you complete the printer’s hardware setup, proceed to install the printer software, and then if required, update the firmware.

How to Install HP Laserjet MFP M775Z

Unpack the Printer

Place the printer in a place where there is ample space to extend the printer trays and covers.
Take out the printer from the box, and keep the printer accessories safe.
Now, remove all the packaging tapes and the protective covers from the printer.
Then open the printer trays and discard the protective materials from inside.

Connect Network Cable

1. In case you are using the wireless network or USB connection, skip this step.
2. For wired network connection, connect an Ethernet cable between the router and the printer.

Basic HP Laserjet MFP M775Z Setup

1. After the printer turns on, the home screen shows up on the printer’s LCD panel.
2. Now, set the language, date & time, and region on the printer.
3. If the printer has the wired network connection, then the printer IP address is seen under the Network menu.

Connect Power Cable

1. Check the power rating of the supply and the voltage rating of your printer before you start with the power connection.
2. Attach the power cable to the printer and plug one end of the power cable to the power socket.
3. To turn on the HP printer, press the power button on the control panel.

Install Printer Software

1. When the hardware setup is complete, perform the software installation on your computer.
2. Following that, perform the USB or wireless connection setup.

Load Paper in Tray-2

1. Draw the paper tray-2 outwards from the printer.
2. Slide the paper length and the paper width guides to the extent of the paper tray.
3. Arrange the papers with its printing face on top, and place it in the tray, then ensure that the paper stack is below the maximum tray limit indicator.
4. Adjust the paper guides to the edges of the paper, but do not fold or squeeze the paper.
5. Next, the HP Laserjet MFP M775Z setup detects the paper; after that, make the necessary paper settings on the control panel.

HP Laserjet 3050 Unboxing Setup

1. Make sure that your table is free from debris and foreign materials for placing the HP Laserjet 3050 printer.
2. Remove the printer from its package and keep it on the desk.
3. Check if the printer components are present inside the box.
4. Set the ADF (Automatic Document Feeder) and media tray of the HP Laserjet 3050 setup.
5. Fix the print cartridges provided in the printer carton.
6. Unpack the power cable and connect it to the power port of the HP Laserjet 3050 printer and computer.
7. Connect the telephone line provided in the printer box.
8. Power up the HP Laserjet 3050 printer by using its power button and configure your preferences on its control panel.
9. After configuring the hardware of the printer, set up its software.
10. Refer to the following topic to obtain the software for the printer.

How to Install HP Laserjet m751n

Open the HP LaserJet M751N printer box.
Take out the HP printer from its box and keep it on a flat surface.
Peel off the packing tapes and materials from the printer.
Raise the access cover at the front of the printer.
Take a new toner cartridge and remove its packing materials.
Gently tremble the cartridge for 5 to 6 times.
Install the cartridge into the printer.
Close the opened access cover at the front.
Pull out the tray 2 and remove the packing materials from it.
Keep enough sheets in the tray and fix them by adjusting the guides.
Re-fix the tray.
Plug the power cable to the power port of the HP LaserJet M751N printer and wall electrical outlet directly.
Turn up the HP LaserJet printer by using its power button.
Specify your preferences on the panel of the HP LaserJet M751N printer.
Launch the current version of the printer driver and complete the LaserJet printer setup.

How to Install HP Color Laser 179fnw

• Take out the HP Color Laser 179FNW printer from its box.
• Remove all the tapes and covers from the printer.
• "Locate" a flat surface and place your HP Color Laser 179FNW printer on it.
• "Take" all the packing materials and tapes from the printer.
• Extend the input tray of the printer to its maximum position.
• "Remove tapes" and lift the paper cover.
• "Load" compatible sheets in the paper tray.
• Fix the sheets by adjusting the guides.
• Execute the power connection of the HP Color Laser 179fnw Setup.
• Download & launch the recent version of the full feature HP Color printer software on your computer.

How to Install HP Laserjet Pro m130nw

You primarily need to prepare for the printer setup by checking the requirements to prepare for the network connection setup and driver installation. Switch on the HP Laserjet Pro M130NW printer and check if it is in a ready state. Do not plug in the cable until you are prompted to do so. Select your desired network connection. Use the USB cable to form a connection between the printer and the computer. Choose your printer model from the list that appears on the panel and then modify the printer settings by following the on-screen instructions.

Step 1 :  Discard the packing materials from the printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
Step 2 :   View the back of the box as the contents may vary by country/region. Now, connect the power cord to the power supply and the electrical outlet.
Step 3 :   Switch on the HP Laserjet Pro M130NW printer and then set the language and country/region. Select Basic Settings, then type the Date in the correct two-digit format and then enter OK.
Step 4 :   Now, make sure that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then select the OK option. Load plain and white paper in the main paper tray and then make sure that you slide the paper-width guide to its outermost position.
Step 5:   It is recommended to ensure that you insert the stack of paper print-side down along the right side of the paper tray and then move on to the next step. Also, ensure that the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.
Step 6 :   Now, remove the new cartridge from its package and discard the tape from it. Ascertain that you insert the cartridges into their respective slots.Close the front access door, then select Setup on the printer’s control panel and then choose the Align Cartridge option. Now, you need to select OK.

How to Install HP Laserjet Pro cp1025nw

You initially need to prepare for the printer setup by checking the requirements to prepare for the network connection setup and driver installation. Turn on the HP Laserjet Pro CP1025NW printer and verify if it is in a ready state. Do not connect the cable until you are prompted. Choose your desired network connection. You can also use the USB cable to connect the printer and the computer. Select your printer model from the list that appears on the panel and then customize the printer settings by following the on-screen instructions.

Step 1 :   Discard the unwanted wrap from the printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
Step 2 :   Look at the back of the box as the contents may vary by country/region. Now, plug in the power cord to the power supply and the electrical outlet.
Step 3 :   Turn on the HP Laserjet Pro CP1025NW printer and then set the language and country/region. Tap Basic Settings, then type the Date in the correct two-digit format and then select OK.Now, make sure that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter the OK option.
Step 4 :   Mount plain and white paper in the main paper tray and then make sure that you slide the paper-width guide to its outermost position.
Step 5 :   It is advisable to ensure that you insert the stack of paper print-side down along the right side of the paper tray and then proceed to the next step.Also, ascertain that the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.
Step 6 :   Take out the new cartridge from its package and discard the tape from it. Make sure that you insert the cartridges into their respective slots. Shut the front access door, then select Setup on the HP Laserjet Pro CP1025NW printer’s control panel and then select the Align Cartridge option. Now, you need to click OK.

How to Install HP Laserjet Pro m252dw

The first and the foremost step is to check the requirements to prepare for the network connection setup and driver installation. Now, turn on the HP Laserjet Pro M252DW printer and verify if it is in a ready state. Do not connect the power cable until you are prompted. Opt for your desired network connection. You can also the USB cable to connect the printer and the PC. Choose your printer model from the list that appears on the control panel and then customize the printer settings by following the on-screen instructions.

UNBOX SETUP
Step 1 :   Take out the unwanted wrap from the printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
Step 2 :   See the back of the box as the contents may vary by country/region. Now, connect the power cord to the rear side of the printer and the electrical socket. Turn on the HP Laserjet Pro M252DW printer and then you can set the language and country/region. Tap Basic Settings, then type the Date in the correct two-digit format and then enter OK.
Step 4 :   Ascertain that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter the OK option. Now, proceed to the next step.Carefully mount plain and white paper in the main paper tray and then make sure that you slide the paper-width guide to its outermost position.
Step 6 :   It is recommended to make sure that you insert the stack of paper print-side down along the right side of the paper tray and then you can proceed to the next step.
Step 7 :   Also, ensure that the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.Now, take out the new cartridge from its package and discard the tape from it. Ensure that you insert the cartridges into their respective slots.
Step 9 :   Close the front access door, then select Setup on the printer’s control panel and then select the Align Cartridge option. Now, you need to click the OK option.

How to Install HP Laserjet Pro m402dw

The primary step is that you need to check the requirements to prepare for the network connection setup and driver installation. Now, switch on the HP Laserjet Pro M402DW printer and verify if it is in a ready state. Do not connect the power cord until you are prompted. Select the network connection. You can also use the USB cable to form a connection between the printer and the PC. Choose your printer model from the list that appears and then customize the printer settings by following the on-screen instructions.

UNBOX SETUP
Step 1 :   Remove the packing materials from the printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
Step 2 :   Observe the back of the box as the contents may vary by country/region. Connect the power cord to the hind side of the printer and the electrical socket.
Step 3 :   Switch on the HP Laserjet Pro M402DW printer and then set the language and country/region. Tap Basic Settings, then select the Date in the correct two-digit format and then tap OK.
Step 4 :   It is better to ensure that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter OK. Now, move on to the next step.You need to carefully place a plain and white paper in the main paper tray and also make sure that the paper-width guide slides to its outermost position.
Step 5 :   It is better to make sure that you insert the stack of paper print-side down along the right side of the paper tray and then you can move on to the next step.Also, verify if the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.
Step 6 :   Take out the new cartridge that had been shipped with the printer and discard the tape from it. Now, insert the cartridges into their respective slots.Close the front access door, then select Setup on the control panel and then tap the Align Cartridge option.

How to Install HP Laserjet Pro m402n

The initial step is to check the requirements to prepare for the network connection setup and driver installation. Now, turn on your 123 HP Laserjet Pro M402N printer and verify if it is in a ready state. It is advisable to not connect the power cable until you are prompted. You can choose your network connection. Use the USB cable to link the printer and the system. Select the printer model from the list that appears on the control panel and then customize the printer settings by following the on-screen instructions.

HP LASERJET PRO M402N UNBOXING SETUP
Step 1 :   Take out the plastic wrap from the printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
Step 2 :   See the back of the box as the contents differ by country/region. Now, plug in the power cord to the rear side of the printer and the electrical socket.
Step 3 :   Switch on the 123 HP Laserjet Pro M402N printer and then set the language and country/region. Click Basic Settings, then type the Date in the correct two-digit format and then select OK.
Step 4 :   It is better to ensure that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter OK. Now, continue to the next step.
Step 5 :   Carefully insert plain and white paper in the main paper tray and then make sure that you slide the paper-width guide to its outermost position.It is recommended to make sure that you insert the stack of paper print-side down along the right side of the paper tray and then you can proceed to the next step.
Step 6 :   Also, ensure that the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.Now, take out the new cartridge from that had been shipped with the printer and discard the tape from it. Place the cartridges into their respective slots.
Step 8 :   Close the front access door, then click Setup on the panel and then select the Align Cartridge option.

How to Install HP Laserjet Pro m426fdn

Check the requirements to prepare for the network connection setup and driver installation and then switch on the HP Laserjet Pro M426FDN printer. Make use of the components that had been shipped with the printer. You can use the installation CD to install the printer driver and software. If it doesn’t work, uninstall the existing driver and install it again. You can also download the compatible driver from our website. Insert the ink cartridges in their respective slots. You can also use the USB cable to form a connection between your printer and PC. Install your 123.hp.com/ljprom426fdn printer with the help of the guidelines below.

 HP LASERJET PRO M426FDN UNBOX SETUP
Step 1 :   Open the Scanner lid and position the alignment page on the scanner glass. It must be positioned according to the conferred guides around the scanner glass.
Step 2 :   As the contents may vary by country/region view the back of the box. Now, connect the power cable to the printer and the electrical outlet.
Step 3 :   After switching on the HP Laserjet Pro M426fdn printer, set the language and country/region and select Basic Settings. Type the Date in the correct two-digit format and then tap OK.Now, make sure that you type the time in the correct format, HH: MM (02:45), then set AM or PM and then choose the OK option.
Step 4 :   Load a plain and white paper in the main paper tray and then you need to ensure that the paper-width guide slides to its outermost position.
Step 5 :   It is recommended to ascertain that you place the stack of paper print-side down along the right side of the paper tray and then move on to the next step.
Step 6 :   Verify if the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.
Step 7 :   Now, remove the new cartridge from its package and take out the tape from it. Ascertain that you place the cartridges into their respective slots.Shut the front access door, then select Setup on the printer’s control panel and then choose the Align Cartridge option. Click OK.

How to Install HP Laserjet Pro m477fdw

Installing the HP Laserjet Pro m477fdw printer is usually a simple task. You needn’t have to do much more than connect the printer to your system, switch on the printer and then let your system automatically install the printer for you. The automatic install printer method works most of the time but sometimes times you’ll have to use the manual install method to get the printer up and running. Customize the printer settings by following the on-screen instructions. Here are the fundamental steps you can follow to set up your printer.

HP LASERJET PRO M477FDW FIRST TIME PRINTER SETUP
Step 1 :   Unbox the 123.hp.com/setup printer. Discard all the unwanted wrap from the printer and then connect the power cable to the rear side of the printer and electrical socket.
Step 2 :   Make sure that it’s turned on. Now, assemble the preferences. Once you have completed assembling the preferences, load the paper into the input tray.Now, you need to set up the ink cartridges that had been delivered in the box with the printer to achieve the best print quality.
Step 4 :   Place the cartridges into their corresponding slots with the color indications on their tops. Insert the tri-color cartridge in the left and the black in the right slot.
Step 5 :   In order to locate the Printer settings on your Windows PC, you may find the Printer settings in the Control Panel. For Mac, it is in the System Preferences. You can follow the instructions that appear on the screen after looking for the option to Add a printer in the printer’s control panel.
Step 7 :   Now it’s time that you try printing something! For example, you could try printing a test page to check the status of the HP Laserjet Pro M477FDW printer.You may notice that a dialog box will appear. From the list, you need to locate and select the new printer and then click Print.
Step 9 :   The page will now be printed. But if it doesn’t work, do not freak out! For further information and support, reach us at the Toll Free: (877) 389-3239.

How to Install HP Laserjet Pro m452dn

The fundamental step is that you need to check the requirements to prepare for the network connection setup and driver installation. Now, switch on the HP Laserjet pro M452DN printer and verify if it is in a working condition. Do not connect the power cable until you are instructed. Opt for the desired network connection. You can also use the USB cable to form a connection between the printer and the system. Select the model of your printer from the list that appears and then customize the printer settings by following the on-screen instructions.

UNBOX SETUP

• Step 1 :   Remove the packing wrap from the HP Laserjet pro M452DN printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
• Step 2 :   Examine the back of the box as the contents may vary by country/region. Connect the power cord to the backside of the printer and the electrical socket.
• Step 3 :   Now, switch on the HP Laserjet pro M452DN printer and then set the language and country/region. Click Basic Settings, then select the Date in the correct format and then tap OK.
• Step 4 :   It is better to ascertain that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter OK. Now, go to the next step.
• Step 5 :   You need to carefully locate a plain and white paper in the main paper tray and also make sure that the paper-width guide slides to its outermost position.It is better to verify that you insert the stack of paper print-side down along the right side of the paper tray and then you can move on to the next step.
• Step 7 :   Also, re-check if the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.Take out the new cartridge that had been shipped with the printer and eliminate the tape from it. Now, insert the cartridges into their corresponding slots.
• Step 9 :   Close the front access door, then select Setup on the control panel and then click on the Align Cartridge option.

How to Install HP Laserjet m712dn

FOR WINDOWS

• The basic step is to choose your printer model from the list that appears on the printer’s control panel, once you visit our website. Now, examine if the OS version is correct.
• Under the Driver-Product Installation Software, ensure that you download the full feature software and use the guided HP Download and Install Assistant by following the prompts on the screen.
• Choose the Download only icon and tap Learn more to download the printer driver on Windows, if ‘Installing Your HP Laserjet M712DN Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.
• To complete your printer setup, opt for the desired network connection. Based on the work requirement, you can choose the apt print job and then move on to the next step.
• If you want to install with the disc that had been shipped with the printer, re-check if the operating system supports it.

FOR MAC

• The basic step is to select your 123.hp.com/lj m712dn printer model from the list that appears on the control panel, once you visit our website. Also, cross-check if the Operating System version is correct.
• Under the Driver-Product Installation Software, you can download the full feature software and then use the guided HP Download and Install Assistant by following the prompts on the screen.
• Select the HP Scan option on the Install screen to create a print queue on your Mac computer and then ascertain that you tap the Add Printer option to open the Add window.
• Choose your printer model from the printer list and then click the Use or Print Using menu option. Now, before proceeding to the next step, select the Add printer option.
• Select the desired network connection and based on the print job choose the printer function. For any further information and support, you can reach our technical experts on the Toll Free: (877) 389-3239.

How to Install HP Laserjet m605x

FOR WINDOWS

• The first and the foremost step is to choose your printer model from the list that appears on the control panel, once you visit our website. Now, re-check if the OS version is correct.
• Under the Driver-Product Installation Software, ensure that you download the full feature software and use the guided HP Download and Install Assistant by following the on-screen instructions.
• Select the Download only icon and click Learn more to download the 123.hp.com/lj m605x printer driver on Windows, if ‘Installing Your Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.
• To complete the printer setup, choose the desired network connection. Based on your work requirement, choose the apt print job and then move on to the next step.
• If you want to install with the disc that had been shipped with the printer, verify if the operating system supports it.
FOR MAC

• The foremost step is to select your printer model from the list that appears on the control panel, once you visit our website. Also, verify if the Operating System version is correct.
• Under the Driver-Product Installation Software, you can download the full feature software and then use the guided HP Download and Install Assistant by following the on-screen instructions.
• Select the HP Scan option on the Install screen to create a print queue on your Mac OS and then ensure that you tap the Add Printer option to open the Add window.
• Choose your printer model and then ascertain that you click the Use or Print Using menu option, Now, select your HP Laserjet M605X printer model in the pop-up menu and then tap the Add option.
• Ensure that you choose the desired network connection and based on the print job select the printer function. For any further information you can contact our technical experts on the Toll Free: (877) 389-3239.

How to Install HP Laserjet M604dn

• The first and the foremost step is to visit our website and choose your 123.hp.com/ lj m604dn printer model from the list that appears on the control panel. Re-check if the OS version is correct.
• Now, Download the full feature software, under the Driver-Product Installation Software and follow the on-screen instructions to use the guided HP Download and Install Assistant.
• Choose the Download only option and tap Learn more to download the printer driver on Windows, if ‘Installing Your Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.
• To complete the printer setup, choose the desired printer connection and based on your necessity, choose the apt print job. Now, you can move on to the next step.
• If you want to install with the disc that had been shipped with the printer, verify that the disc has drivers supported in the operating system. For any clarification or support, reach us on the Toll-free number.
model from the list that appears on the control panel. Re-check if the OS version is correct.
• Now, Download the full feature software, under the Driver-Product Installation Software and follow the on-screen instructions to use the guided HP Download and Install Assistant.
• Choose the Download only option and tap Learn more to download the printer driver on Windows, if ‘Installing Your Printer Driver Using the Windows Built-in Solution’ displays on your printer screen.
• To complete the printer setup, choose the desired printer connection and based on your necessity, choose the apt print job. Now, you can move on to the next step.
• If you want to install with the disc that had been shipped with the printer, verify that the disc has drivers supported in the operating system. For any clarification or support, reach us on the Toll Free: (877) 389-3239.

How to Install HP Deskjet3775 Printer

1. Tear the tape covering the top of the box and open the flaps.
2. Take the power cable, USB cord, cartridges, and other pamphlets from the box.
3. Remove the 123.hp.com/dj3775 printer from the box and tear the cover off the printer.
4. The plug end of the power cord needs to be attached to a nearby wall outlet.
5. Link the inlet end at the rear of the printer.
6. Turn on the device and wait for the warmup process to complete.
7. Open the carriage door and install the cartridges in their respective slot.
8. Now install the 123.hp.com/dj3775 printer driver on the computer and open it.
9. Print an alignment page to verify the connection and commence the setup process.