How to Install HP Laserjet MFP M775Z

Unpack the Printer

Place the printer in a place where there is ample space to extend the printer trays and covers.
Take out the printer from the box, and keep the printer accessories safe.
Now, remove all the packaging tapes and the protective covers from the printer.
Then open the printer trays and discard the protective materials from inside.

Connect Network Cable

1. In case you are using the wireless network or USB connection, skip this step.
2. For wired network connection, connect an Ethernet cable between the router and the printer.

Basic HP Laserjet MFP M775Z Setup

1. After the printer turns on, the home screen shows up on the printer’s LCD panel.
2. Now, set the language, date & time, and region on the printer.
3. If the printer has the wired network connection, then the printer IP address is seen under the Network menu.

Connect Power Cable

1. Check the power rating of the supply and the voltage rating of your printer before you start with the power connection.
2. Attach the power cable to the printer and plug one end of the power cable to the power socket.
3. To turn on the HP printer, press the power button on the control panel.

Install Printer Software

1. When the hardware setup is complete, perform the software installation on your computer.
2. Following that, perform the USB or wireless connection setup.

Load Paper in Tray-2

1. Draw the paper tray-2 outwards from the printer.
2. Slide the paper length and the paper width guides to the extent of the paper tray.
3. Arrange the papers with its printing face on top, and place it in the tray, then ensure that the paper stack is below the maximum tray limit indicator.
4. Adjust the paper guides to the edges of the paper, but do not fold or squeeze the paper.
5. Next, the HP Laserjet MFP M775Z setup detects the paper; after that, make the necessary paper settings on the control panel.