Installing the HP Laserjet Pro m477fdw printer is usually a simple task. You needn’t have to do much more than connect the printer to your system, switch on the printer and then let your system automatically install the printer for you. The automatic install printer method works most of the time but sometimes times you’ll have to use the manual install method to get the printer up and running. Customize the printer settings by following the on-screen instructions. Here are the fundamental steps you can follow to set up your printer.
HP LASERJET PRO M477FDW FIRST TIME PRINTER SETUP
Step 1 : Unbox the 123.hp.com/setup printer. Discard all the unwanted wrap from the printer and then connect the power cable to the rear side of the printer and electrical socket.
Step 2 : Make sure that it’s turned on. Now, assemble the preferences. Once you have completed assembling the preferences, load the paper into the input tray.Now, you need to set up the ink cartridges that had been delivered in the box with the printer to achieve the best print quality.
Step 4 : Place the cartridges into their corresponding slots with the color indications on their tops. Insert the tri-color cartridge in the left and the black in the right slot.
Step 5 : In order to locate the Printer settings on your Windows PC, you may find the Printer settings in the Control Panel. For Mac, it is in the System Preferences. You can follow the instructions that appear on the screen after looking for the option to Add a printer in the printer’s control panel.
Step 7 : Now it’s time that you try printing something! For example, you could try printing a test page to check the status of the HP Laserjet Pro M477FDW printer.You may notice that a dialog box will appear. From the list, you need to locate and select the new printer and then click Print.
Step 9 : The page will now be printed. But if it doesn’t work, do not freak out! For further information and support, reach us at the Toll Free: (877) 389-3239.
HP LASERJET PRO M477FDW FIRST TIME PRINTER SETUP
Step 1 : Unbox the 123.hp.com/setup printer. Discard all the unwanted wrap from the printer and then connect the power cable to the rear side of the printer and electrical socket.
Step 2 : Make sure that it’s turned on. Now, assemble the preferences. Once you have completed assembling the preferences, load the paper into the input tray.Now, you need to set up the ink cartridges that had been delivered in the box with the printer to achieve the best print quality.
Step 4 : Place the cartridges into their corresponding slots with the color indications on their tops. Insert the tri-color cartridge in the left and the black in the right slot.
Step 5 : In order to locate the Printer settings on your Windows PC, you may find the Printer settings in the Control Panel. For Mac, it is in the System Preferences. You can follow the instructions that appear on the screen after looking for the option to Add a printer in the printer’s control panel.
Step 7 : Now it’s time that you try printing something! For example, you could try printing a test page to check the status of the HP Laserjet Pro M477FDW printer.You may notice that a dialog box will appear. From the list, you need to locate and select the new printer and then click Print.
Step 9 : The page will now be printed. But if it doesn’t work, do not freak out! For further information and support, reach us at the Toll Free: (877) 389-3239.
No comments:
Post a Comment