The fundamental step is that you need to check the requirements to prepare for the network connection setup and driver installation. Now, switch on the HP Laserjet pro M452DN printer and verify if it is in a working condition. Do not connect the power cable until you are instructed. Opt for the desired network connection. You can also use the USB cable to form a connection between the printer and the system. Select the model of your printer from the list that appears and then customize the printer settings by following the on-screen instructions.
UNBOX SETUP
- Step 1 : Remove the packing wrap from the HP Laserjet pro M452DN printer, then fix the paper tray by inserting the pegs into the correct slots and then pull out and unfold the tray extender.
- Step 2 : Examine the back of the box as the contents may vary by country/region. Connect the power cord to the backside of the printer and the electrical socket.
- Step 3 : Now, switch on the HP Laserjet pro M452DN printer and then set the language and country/region. Click Basic Settings, then select the Date in the correct format and then tap OK.
- Step 4 : It is better to ascertain that you type the time in the correct format, HH: MM (01:45), then set AM or PM and then enter OK. Now, go to the next step.
- Step 5 : You need to carefully locate a plain and white paper in the main paper tray and also make sure that the paper-width guide slides to its outermost position.It is better to verify that you insert the stack of paper print-side down along the right side of the paper tray and then you can move on to the next step.
- Step 7 : Also, re-check if the stack of paper aligns with the right and back edges of the tray and fits below the line marking in the tray.Take out the new cartridge that had been shipped with the printer and eliminate the tape from it. Now, insert the cartridges into their corresponding slots.
- Step 9 : Close the front access door, then select Setup on the control panel and then click on the Align Cartridge option.
No comments:
Post a Comment